SHOW PRICES INCLUDING VAT
Trustpilot
Click to visit the Rapid Blog - Supporting welders every step of the way
0Your Basket : £ 0.00
WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
9873804 Kemppi Zeta Fresh Air W201 Auto Darkening Welding Helmet, Shades 8-12
    Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

    Rapid Ref : 9873804  

    Kemppi Zeta Fresh Air W201 Auto Darkening Welding Helmet, Shades 8-12
    9873804

    £291.00  EX VAT
    SSP Suggested Selling Price = £342.32  YOU SAVE £51.32
     Buy in 3 easy interest free payments of £97.00† with
    Shop Parts

    Get optimal protection and comfort when welding or cutting. Zeta Fresh Air combines a lightweight welding and cutting helmet with a certified Kemppi respirator in one complete respiratory protection system. It supports welder health by providing comprehensive eye, face and respiratory protection in a comfortable, easy-to-use design.

    Zeta Fresh Air welding helmets feature a lightweight, slim design that reduces neck fatigue and improves on-site mobility while meeting EN 166 and EN 175 face-protection standards. Comfortable and easy to operate with one hand, they also provide full protection against ultraviolet light and infrared radiation.

    Related Items

    Kemppi Air Fed Parts FAQs

    Spares for powered and air-fed welding helmet systems, and how to work out the right part for your set-up.

    Why can't I use a dust filter to protect against welding gases?icon-minus-redicon-plus-red

    Particle filters only trap solid particles and fume. They do not remove gases or vapours, so a particle filter alone does not protect against gases produced by some welding and cutting work. HSE welding guidance makes the same point about the particulate filters used on disposable masks and half masks.

    If your risk assessment says gas or vapour protection is needed, you need a filter specifically rated for that, and the system must be approved to take it. Check the markings on the old filter and the instructions for your unit, and ask the maker or our team if you are unsure which type your system uses.

    Can I wear an air-fed or powered helmet with a beard?icon-minus-redicon-plus-red

    It depends on the type of facepiece. HSE guidance says tight-fitting masks rely on a seal against the skin, and stubble or a beard stops a good seal. Loose-fitting powered helmets and hoods work differently: the unit keeps a flow of clean air through the headtop, so they need no tight seal.

    That said, there are limits. Makers usually set limits on facial hair and the helmet must be the right size and correctly adjusted for the wearer. Check your unit's instructions and your employer's RPE assessment, especially where the system includes a separate face seal.

    How do I work out which spare part fits my air-fed system?icon-minus-redicon-plus-red

    Start with the data plate, the instruction manual and the part number printed or moulded on the old part. Air-fed systems are made up of separate items (helmet shell, face seal, headband, filter, breathing tube, flow unit, battery, belt), and each maker designs them to work as a set.

    Write down the system name or type, the marking on the part and any version or year shown. If the number is worn off, a photo of the part and the unit data plate usually lets our team help you match it. Avoid guessing from appearance alone, as parts can look alike but differ in fit or performance.

    Can I mix parts from different makers or different system ranges?icon-minus-redicon-plus-red

    It is best not to. Powered and air-fed systems are approved and tested as complete assemblies, and the protection level depends on that whole combination of helmet, tube, filter and power unit working together. Swapping a filter, tube or seal for one from another range can change airflow or fit and may invalidate the approval.

    HSE guidance advises that replacement parts should preferably come from the original maker so the equipment keeps its stated performance. Check the manual to see which parts are approved for your system, and ask the maker or supplier if the instructions do not say.

    See all 6 questions for this category

    Shop Similar Categories