SHOW PRICES INCLUDING VAT
Trustpilot
Click to visit the Rapid Blog - Supporting welders every step of the way
0Your Basket : £ 0.00
WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
9873825 Kemppi Zeta Fresh Air G201x Grinding Helmet
    Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

    Rapid Ref : 9873825  

    Kemppi Zeta Fresh Air G201x Grinding Helmet
    9873825

    £194.00  EX VAT
    SSP Suggested Selling Price = £227.92  YOU SAVE £33.92
     Buy in 3 easy interest free payments of £64.67† with
    Shop Parts

    Zeta Fresh Air welding helmets combine a lightweight, slim design with EN 166 and EN 175 face protection. They reduce neck fatigue, improve mobility on site, support comfortable one-handed operation, and provide full protection against ultraviolet and infrared radiation.

    Beyond fresh air and full-face protection, the Zeta Fresh Air G201x features automatic LED work lights powered by the blower unit. The lights switch on or off based on ambient conditions, with easy-to-reach, one-handed controls for manual adjustment. A well-lit workspace helps maximise safety and performance.

    Related Items

    Kemppi Air Fed Parts FAQs

    Spares for powered and air-fed welding helmet systems, and how to work out the right part for your set-up.

    Why can't I use a dust filter to protect against welding gases?icon-minus-redicon-plus-red

    Particle filters only trap solid particles and fume. They do not remove gases or vapours, so a particle filter alone does not protect against gases produced by some welding and cutting work. HSE welding guidance makes the same point about the particulate filters used on disposable masks and half masks.

    If your risk assessment says gas or vapour protection is needed, you need a filter specifically rated for that, and the system must be approved to take it. Check the markings on the old filter and the instructions for your unit, and ask the maker or our team if you are unsure which type your system uses.

    What should I check on an air-fed helmet system before each shift?icon-minus-redicon-plus-red

    Check the whole system before every use. HSE guidance says employers should confirm RPE is working before each use, and a powered system needs a quick look at the battery condition and the airflow indicator or low-flow warning, as set out in the maker's instructions.

    Also look at the filter and spark guard (fitted, clean, undamaged), the breathing tube (no cuts, kinks or loose ends), the face seal and headband, and the cover lens. If the airflow warning sounds, the battery is weak or anything is damaged, stop and fix it before welding. Do not rely on a system that is not giving its full airflow.

    Can I wear an air-fed or powered helmet with a beard?icon-minus-redicon-plus-red

    It depends on the type of facepiece. HSE guidance says tight-fitting masks rely on a seal against the skin, and stubble or a beard stops a good seal. Loose-fitting powered helmets and hoods work differently: the unit keeps a flow of clean air through the headtop, so they need no tight seal.

    That said, there are limits. Makers usually set limits on facial hair and the helmet must be the right size and correctly adjusted for the wearer. Check your unit's instructions and your employer's RPE assessment, especially where the system includes a separate face seal.

    Can I mix parts from different makers or different system ranges?icon-minus-redicon-plus-red

    It is best not to. Powered and air-fed systems are approved and tested as complete assemblies, and the protection level depends on that whole combination of helmet, tube, filter and power unit working together. Swapping a filter, tube or seal for one from another range can change airflow or fit and may invalidate the approval.

    HSE guidance advises that replacement parts should preferably come from the original maker so the equipment keeps its stated performance. Check the manual to see which parts are approved for your system, and ask the maker or supplier if the instructions do not say.

    See all 6 questions for this category

    Shop Similar Categories