WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
    Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

    Rapid Ref : CK-A316C35  Mfr Ref : A316C35

    Collet for 4.8mm (3/16")
    A316C35 CK-A316C35

    £3.45  EX VAT
    SSP Suggested Selling Price = £6.90  YOU SAVE £3.45

    2304-0146 MS1111.

    CK 51 Series Parts FAQs

    Collets, gas lenses and related spares for a TIG torch: how to match them to your tungsten and torch, and how to look after them.

    What is the difference between a standard collet body and a gas lens?icon-minus-redicon-plus-red

    Both screw into the torch head, hold the collet in place and pass shielding gas to the cup. A standard collet body releases the gas through small holes around its base. A gas lens makes the gas pass through fine mesh screens first, which smooths the flow and makes it less turbulent.

    Torch makers say gas lens parts reduce turbulence, improve coverage and allow more tungsten stick-out. A gas lens needs a cup made for its thread, so check what your torch takes before changing, and follow your torch manual.

    How do I match a collet or gas lens to my tungsten size?icon-minus-redicon-plus-red

    The collet, the collet body and the gas lens are all sized by the diameter of the tungsten electrode. A maker's selection guide gives the example that a 3/32 inch (2.4 mm) electrode needs a 3/32 inch (2.4 mm) collet and a collet body or gas lens of the same size. Inch and millimetre sizes are close but not identical, so check the marking.

    The torch type also matters, because there are different part sizes for different torch types. Check the size stamped on the old part or listed in your manual, and treat collet, body and tungsten as a matched set.

    Which tungsten type should I use with a gas lens for AC and DC?icon-minus-redicon-plus-red

    The tungsten type depends on the current and metal, not on the gas lens. A technical page from a welding-equipment maker states that pure tungsten suits AC only, zirconiated tungsten is mainly for AC, and lanthanated and ceriated types suit both AC and DC.

    Another maker's guide says pure tungsten can start poorly on modern inverter machines and recommends ceriated or lanthanated instead. The colour band identifies the type, but check the packaging because colours vary between suppliers. Match the electrode diameter to your current range, and to the collet and gas lens you have fitted.

    How far can the tungsten stick out with a gas lens?icon-minus-redicon-plus-red

    A gas lens generally allows more stick-out than a standard collet body, because the smoother gas column protects the tungsten and weld pool for longer. A torch maker's data sheet gives general-purpose extension as a small multiple of the tungsten diameter beyond the end of the cup, and a larger limit only in draft-free conditions.

    Guides measure stick-out differently, some from the collet and some from the cup, so check which your manual means. Keep it as short as the joint allows. If you see a dark or porous weld, shorten the stick-out and check the gas flow, seals and cup before anything else.

    Shop Similar Categories