0 items in your basket
Total £ 0.00 EX VAT
SHOPS
Special Buys/Offers
Rapid Merchandise Shop
PATON Shop
GoGrid Shop
GasiQ Shop
CK Shop
Furick TIG Shop
GPPH Shop
Kemppi Shop
Spiderhand Shop
Optrel Shop
3M Shop
Plymovent Fume Extraction
Miller Shop
Elga Shop
CEPRO Shop
Bohler Welding Shop
SFE Shop
Hypertherm Shop
Lincoln Electric Shop
ESAB Shop
Fronius Shop
HMT Shop
Gullco Shop
FEIN Shop
SAIT Shop
Harris Shop
FANUCI & FALCON Shop
Jackson Safety Shop
Key Plant Automation Shop
Orbitalum Shop
Bessey Shop
Bester Shop
EWM Shop
MACHINES
Welding Machine Offers
Arc Welders
MIG Welders
TIG Welders
Plasma Cutters
Air Compressors
Engine Driven Welders
Battery Power Supplies
Generators
Fume Extraction
Sub Arc Machines
Weld Positioning Equipment
Cutting Equipment
Spot Welders
Stud Welders
Used Machines
LC Laser Shop
ARC
MMA Electrodes
Cable Sets
Earth Clamps
Electrode Holders
Cable Connectors
Welding Cable
Welding Helmets
Arc Accessories
Rod Ovens
Learning
Exothermic Cutting
Chemical Aids
Gouging
MIG
MIG Filler Wire
MIG Torches & Parts
Site Wire Feeders
MIG Regulators
Ceramic Backing Tiles
MIG Accessories
TIG
TIG Torches
TIG Torch Parts
Tungsten Electrodes
TIG Filler Wire
Machine Remotes
TIG Accessories
Cold Wire Feeders
TIG Gauntlets
Tung Buddy
Tungsten Sharpening
Weld Cleaning
Gas Purging Tools
LASER
Laser Welders
Laser Cleaners
Laser Accessories
PLASMA
Plasma Torches
Plasma Torch Consumables
Lincoln Cutting Tables
GAS
Cutting & Welding Outfits
Gas Regulators
Flashback Arrestors
Gas Hoses & Fittings
Gas Torches
Gas Cutting Nozzles
Gas Welding & Heating Nozzles
Gas Accessories
Gas Welding & Brazing Rods
Gas Bottle Trolleys
Gas Cutting Machines
Quick Action Couplings
Regulator Accessories
Gas Analysers
SAFETY
Helmet Spares
Air Fed Welding Helmets
Swiss Air System
Goggles
Welding Blankets
Spectacles
Visors
Welding Curtains
Ear Protection
Safety Helmets
Monkey Masks
Gloves
Caps & Hoods
Leather Welding Clothing
Overalls
Weldline Female PPE
Disposable Masks & Respirators
WORKSHOP
Build your own GPPH Welding Table
Magnetic Drilling
Rapid Pipe Shop
Bevelling Machines
Automation
Metal Markers
Inspection Equipment
Pipework Equipment
Site Equipment
Exact Pipe Cutting Machines
Welding Rotators
Welding Tables
Bandsaws & Blades
TORCH &MACHINE SPARES
Pipe Cutting Machine Accessories
Parts for CO2 Laser
Kemppi MIG Parts
Machine Parts
Plasma Welding Torches
Water Coolers
Binzel MIG Parts
Tungsten Grinder Parts
WIRE, FLUX & RODS
Brazing Flux
Sub Arc Wire & Flux
ABRASIVES
3M Abrasives
SAIT Abrasives
Spectre Abrasives
Other Brand Abrasives
Backing Pads
Finishing & Polishing Products
Wire Brushes
Abrasive Belts
TOOLS
Angle Grinders
Right Lines Tool Offers
Magnetic Tools
Welding Clamps
Pipe Fit Up Tools
Site Storage
Orbitalum Pipe Machines
Orbitalum GF Sawblades
KNOWLEDGECENTRE
SERVICEDEPT.
RAPID BLOG
FEEDBACK
HIRE
Straight answers to the questions people ask when choosing and looking after the tungstens, cups, collets and small spares for a compact micro TIG torch.
For low-current work, ceriated (grey) and lanthanated (black, gold or blue) tungstens are the usual choices. Both suit DC and can also be used on AC, and both are commonly chosen for easy arc starting and good stability at lower current. Technical sources list ceriated for the lower to mid current range.Thoriated tungsten (red, and other thoria colours) is slightly radioactive. Technical guidance advises weighing whether it is justified and notes that lanthanum or cerium oxides can replace it with lower risk. Pure and zirconiated tungstens are mainly for AC work on aluminium. Check the colour band or marking on the electrode, and the maker's guidance, before use.
For thin material and low current, grind the tungsten to a fine point. A small, intense arc from a pointed electrode suits thin sheet, and the lower the current the smaller the tip angle should be. Some sources recommend a very small flat on the end of the point; the right angle and flat depend on the current and the maker's guidance.Grind lengthwise, along the electrode, not around it, so the grind marks run towards the tip. Circular marks can make the arc wander. Use a grinding wheel kept only for tungsten so the point does not pick up contamination, and re-grind to the same shape each time for repeatable results.
Stop and re-grind it. Touching the pool, or touching the filler rod to the electrode, contaminates the tip. A contaminated tungsten typically gives a wandering, unsteady arc, can cause porosity, and can leave tungsten inclusions in the weld.Break or cut off the contaminated end, then re-sharpen the tungsten properly before you continue. If the contamination is severe, fit a new electrode. Hotter pools tend to contaminate the tungsten faster, so keep a steady arc length and a steady hand, and keep spare short tungstens to hand. Using a tungsten with a damaged tip will only make the starting and arc problems worse.
A clear borosilicate glass cup lets you see the tungsten and the pool, which helps in corners and tight spaces. It is a good choice for small, close-up work and for learning, because you can see where the electrode is.The trade-offs are that glass is brittle and does not suit being dragged or walked across rough surfaces, and it can cloud with fume deposits over time. A ceramic (alumina) cup is the tougher option and is usually what comes fitted to a torch. Replace any cup that is cracked, chipped or badly clouded, and choose the cup that is made for your torch style, as cups are not interchangeable between torch types.