WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
    Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

    Rapid Ref : ISXX  

    Inflatable Pipe Stopper with Schrader Valve, 2 - 36" (51 - 914mm)
    ISXX

    Select Option 
    Prices From £18.00 ex VAT

    Each inflatable stopper comes with an inflation hose fitted with a Schrader valve enabling inflation with a standard airline, bicycle or foot pump. These inflatable stoppers are supplied as standard with no through tube. Through tubes can be supplied when the stoppers are required for weld purging applications. When deflated, the inflatable stoppers can be inserted and withdrawn with ease.

    Brochures & Manuals

    BROCHURES & MANUALS
       View Brochure

    Stoppers FAQs

    Answers on expanding and inflatable pipe stoppers used to seal the ends of a pipe for gas purging while you weld.

    What is a pipe stopper and how is it used for purging?icon-minus-redicon-plus-red

    A pipe stopper is a plug that seals the end of a pipe or the section either side of a joint, so the inside can be filled with inert gas such as argon while you weld. Without a back purge, the inside of a stainless steel weld oxidises and forms a rough, dark crust, so keeping air away protects the root.

    The gas goes in through a port and the air is pushed out through a vent. Check the maker's instructions for how to fit the type you have.

    What is the difference between expanding and inflatable stoppers?icon-minus-redicon-plus-red

    An expanding stopper is tightened mechanically: turning a wing nut or bolt squeezes a rubber seal outwards against the pipe wall. An inflatable stopper is a bladder that is filled, often with the purge gas itself, until it seals all round the inner circumference of the pipe.

    Expanding types are firm and suit regular round bores of a limited size range. Inflatable types suit larger or less regular bores but need care not to over-inflate. Follow the maker's limits.

    Can I rely on a pipe stopper to stop purge gas leaking out?icon-minus-redicon-plus-red

    No. The HSE says the seal on dams and bladders should not be relied on to prevent gas leakage, and that purging gas leaking or being discharged can accumulate in confined spaces. Always provide a proper vent path and a safe place for the gas to go.

    If you are working in or near an enclosed space, follow your risk assessment, ventilation and gas monitoring arrangements, and the safe system of work for that job.

    Is there an asphyxiation risk when purging pipework with argon?icon-minus-redicon-plus-red

    Yes. Argon and other inert purge gases are heavier than air and can displace oxygen, particularly in low or enclosed areas, and you may not notice before you lose consciousness. The HSE highlights gas building up inside fabrications and confined spaces.

    Plan where the gas will vent, ensure ventilation, use oxygen monitoring where your risk assessment requires, and never use oxygen to improve the air. Follow the maker's instructions.

    Shop Similar Categories