WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
    Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

    Rapid Ref : J5251-5  Mfr Ref : J5251

    Jackson F50 / TLV PAPR Face Seal (Pack of 5)
    J5251 J5251-5

    £266.48  EX VAT
    SSP Suggested Selling Price = £313.50  YOU SAVE £47.02
     Buy in 3 easy interest free payments of £88.83† with

    Jackson F50 Helmet Parts FAQs

    Spare sweatbands, face seals and clear visors for a powered-air welding helmet, and how to choose and look after them.

    Which parts of a powered-air welding helmet wear out and need replacing?icon-minus-redicon-plus-red

    The parts that touch you or face the arc wear first. Sweatbands soak up perspiration and lose their absorbency, the face seal around the face and neck softens or splits with heat, sweat and repeated cleaning, and the clear visor scratches or pits from spatter and dust.

    The blower unit, filters and hose have their own service schedule, and the headgear can loosen with age. Your manual should list which parts are consumable and how often they usually need attention. How quickly each one wears depends on how many hours you weld and in what conditions.

    What does the face seal do, and how do I know it needs replacing?icon-minus-redicon-plus-red

    A powered-air helmet relies on the blower keeping a steady flow of filtered air inside the helmet. The face seal closes the gap around the face and neck so that air is not lost and unfiltered fume is not drawn in at the edges.

    Replace it if you can see splits, tears, stiffness, hardening or permanent distortion, if it no longer sits comfortably against the skin, or if it will not clean up properly. Heat, sweat and cleaning wear seals out over time. If you are unsure, follow the maker's instructions and your workplace RPE procedures rather than carrying on with a doubtful seal.

    How often should I replace the sweatband?icon-minus-redicon-plus-red

    There is no single interval that suits everyone, because it depends on how long you weld, how hot the work is and how often the band is cleaned. Replace it when it is torn, stretched, stiff, matted or no longer absorbs sweat, and whenever it has become unhygienic or you share the helmet with another person.

    Some sweatbands can be washed and others are single use, so follow the maker's instructions. A fresh band is also a quick way to improve comfort, which makes it easier to keep the helmet on and correctly positioned for the whole job.

    How do I find the right replacement visor, seal or sweatband for my helmet?icon-minus-redicon-plus-red

    Start with the helmet itself. Note the maker's name and model from the label or data plate on the shell, then check your manual, which normally lists the parts for that helmet. Part numbers on the old part can also help, but only if the part is not worn away.

    The same part type often comes in different shapes for different helmets, so a part that looks similar may not fit properly. Count how many are in a pack, check whether the part is for the helmet or for the blower and hose, and ask our team if you are unsure which one you need.

    Shop Similar Categories