WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
  • KBM-28U  Gullco Inverted Portable Plate Edge Bevelling Machine with Air Jet
  • KBM-28U  Gullco Inverted Portable Plate Edge Bevelling Machine with Air Jet
Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

Rapid Ref : KBM-28U  

Gullco Inverted Portable Plate Edge Bevelling Machine with Air Jet
KBM-28U

£13945.00  EX VAT
 Buy in 3 easy interest free payments of £4648.33† with
Please note, this product does not qualify for our standard shipping rates outside of the UK Mainland. Please contact us for shipping rates for this product.

With adjustable bevelling head to produce bevel angles 22-1/2°, through 55°. Bevelling speed 120 IPM (305cm/min). Bevelling produced by a rotary shear type cutter ideal for bevelling mild steel, stainless steel and aluminium plates from 5/16" to 2" (8 - 50mm) thick with a maximum bevel width of 1.10" (28mm) at a standard bevel angle 30°.

Machine supplied with a KBM-28-X1C medium tooth cutter, angle bevel pins for 22-1/2°, 30°, 37-1/2°, 45° and 55° bevels. All bevel angles are obtained by tilting the adjustable cutter head assembly on its base frame. The machine is complete with a 3HP, 3-phase motor. Voltages available: 230V, 460V and 575V, 3 phase 60hz, and 380V, 415V, 3 phase, 50hz. 

(Specify voltage at the time of placing order)

Product Details


Brochures & Manuals

BROCHURES & MANUALS
   View Brochure

Related Items

Gullco Bevelling Machines FAQs

Answers to common questions about portable, electrically powered plate edge bevelling machines used to prepare plate edges for welding.

What does a portable plate edge bevelling machine do, and how does it work?icon-minus-redicon-plus-red

It is a mains-powered machine that cuts a straight, machined bevel on the edge of steel, stainless or aluminium plate so the edge is ready for a weld joint. Many work as a rotary shear: a toothed, hardened cutter removes the metal and also pulls the plate through the machine, or pulls the machine along a fixed plate.

Because the bevel is machined, it avoids the heat of thermal cutting. Most machines of this type are meant for straight edges and, with the right guide settings, large curved edges. The adjustable head sets the bevel angle and depth. Always check your own machine's manual for the materials, thickness range and bevel angles it is rated for.

Do I need a separate underside machine to bevel both sides of a plate?icon-minus-redicon-plus-red

A standard machine bevels the top edge of the plate. For joints that need a bevel on both faces (for example X or K preparations), the usual choices are to turn the plate over and bevel the second side, or to use an inverted (underside) version of the machine that bevels the lower edge without turning the plate.

Turning heavy plate takes time and handling effort, so an underside machine is worth considering if you regularly prepare double-sided bevels on large plate. Inverted machines usually need more frequent cleaning, because swarf collects around the cutter, so follow the maker's inspection guidance.

What power supply does the machine need, and how do I check the cutter rotation?icon-minus-redicon-plus-red

Machines of this type are normally three-phase, built for a specific supply voltage and frequency which is shown on the product label. If the supply does not match the label, do not connect it. The machine must also be properly earthed.

The cutter has to turn in the direction marked on the machine. On a three-phase motor, wrong rotation means two of the three live connections are the wrong way round, and the machine can be damaged if it is used that way. Check the rotation before feeding any plate in. If it is wrong, have a competent electrician swap two live connections at the plug while the supply is disconnected.

Can I bevel stainless steel, high-tensile plate or flame-cut edges?icon-minus-redicon-plus-red

Usually yes, but with care and within the limits in your manual. As material strength rises, the bevel a machine can take off in a pass falls, so use shallower cuts and more passes. Keep the cutter sharp, because a dull cutter causes feeding problems and a rough bevel.

Flame-cut edges can carry slag and may be work-hardened, and hardening can be severe on high-tensile steel. Remove all slag before bevelling and check that the material can be machined before you try it. If you are unsure whether a particular grade of plate is suitable, ask the maker or our team before starting.

Shop Similar Categories