WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
    Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

    Rapid Ref : 91.20.11  Mfr Ref : ECP912011

    Cpero Cube Welding 200cm x 190cm Complete
    ECP912011 91.20.11

    £571.55  EX VAT
    SSP Suggested Selling Price = £737.48  YOU SAVE £165.93
     Buy in 3 easy interest free payments of £190.52† with

    Welding Shelters FAQs

    Answers to common questions about welding umbrellas and tents for outdoor and site work.

    Does a welding shelter deal with welding fume?icon-minus-redicon-plus-red

    No. A tent or umbrella is a weather cover, not a ventilation system. Welding fume is a health hazard outdoors as well as indoors, and the HSE says local exhaust ventilation cannot be relied on to capture fume at outdoor work, so suitable respiratory protective equipment (RPE) should be provided and the protection of others nearby considered.

    If you fit side walls or work in a small enclosed tent, fume can build up more than in open air. Keep airflow in mind, follow your risk assessment and use the RPE it calls for.

    Is it safe to weld under a shelter when it is raining?icon-minus-redicon-plus-red

    Rain raises the electric shock risk. Welding in wet, damp or humid conditions reduces the resistance of the body, so use dry insulating mats and boots and keep gloves and clothing dry. For outdoor work, check that the power source is rated for the conditions, and cover the welder, equipment and workpiece if heavy rain is likely.

    A shelter helps keep rain off, but it does not make wet ground or wet equipment safe. Dry and check equipment that has got wet before you use it, and follow the maker's instructions and your risk assessment.

    Can I leave flammable materials near the welding area under a shelter?icon-minus-redicon-plus-red

    No. Sparks and molten metal can ignite combustible materials, so the HSE advises removing flammable material from the area before hot work. Remember that sparks can travel, so also look at what is below, beside and beyond the work area.

    The tent or umbrella fabric itself needs thought too. Keep the arc, cutting sparks and hot metal away from the cover, and stop work and move the shelter if it is being hit by spatter. Your risk assessment and any hot work permit will set the precautions.

    Should I choose a welding umbrella or a welding tent?icon-minus-redicon-plus-red

    It depends on the job. An umbrella is quick to put up and move, so it suits short jobs at one spot, such as a pipe joint or a repair, where one welder needs cover overhead. A tent gives more room, can often have side panels, and suits longer jobs, bigger workpieces or more than one person.

    Think about how long you will be there, how much space you need around the work, how often you will move it and how exposed the site is. Our team can help you choose.

    Shop Similar Categories