WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
    Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

    Rapid Ref : PR2  

    Armorgard Mobile Collapsible Pipe Rack, Certified 2 Tonne Capacity
    PR2

    £1273.00  EX VAT
    SSP Suggested Selling Price = £1590.91  YOU SAVE £317.91
     Buy in 3 easy interest free payments of £424.33† with
    Please note, this product does not qualify for our standard shipping rates outside of the UK Mainland. Please contact us for shipping rates for this product.

    Heavy-duty mobile pipe storage rack measuring 1000 x 1500 x 1560 mm, with a 2-tonne capacity. Designed to keep pipes organised, accessible, and secure, it features a powder-coated finish and six swivel castors. Fully collapsible and stackable when not in use, it is supplied with an official weight-testing certificate.

    Brochures & Manuals

    BROCHURES & MANUALS
       View Brochure

    Pipe Storage FAQs

    Practical answers on choosing, loading and looking after pipe racks so your pipe stays safe, straight and clean.

    How should I load a pipe rack, and what does its rated capacity mean?icon-minus-redicon-plus-red

    The rated capacity is the most the rack is designed to carry when it is set up as the maker describes. You will find it on the data plate or load notice, and it should never be exceeded. Overloading can weaken the structure, and that is not always visible.

    Spread the pipe evenly across the arms or levels rather than piling it at one end or in one spot, and put the heaviest pipe on the lower levels where you can. Add up the weight of the pipe you plan to store, not just the number of lengths.

    If a rack has been linked to another, upgraded or altered in any way, check with the maker that the rating on the plate still applies to the new arrangement.

    How do I stop pipes rolling off a rack?icon-minus-redicon-plus-red

    Round pipe rolls, so it needs something to hold it in place. A good rack has upturned ends, side stops or arms that angle the pipe into a cradle. Where a rack does not do this on its own, use wedges or chocks that are secured so they cannot be knocked out.

    When you take a pipe out, think about what the others will do. Take pipe from the top layer or the end of the stack first, keep clear of the open side, and re-fit any stop that you removed. Do not stack pipe higher than the rack is designed for.

    Stacking too many layers can also squash thin-walled pipe out of round, so a rack that spreads the load is better than a pile.

    How do I stop carbon steel pipe rusting in storage?icon-minus-redicon-plus-red

    Moisture is the cause, so aim to keep the pipe dry. Rust develops faster as humidity rises, and condensation, rain and damp floors are the usual sources. Store pipe off the ground, ideally indoors in a dry, ventilated space.

    If pipe has to be stored outside, cover it with something that sheds water but still lets air move, because a sealed sheet can trap condensation underneath. Warm, damp air meeting cold steel is a common cause of condensation, so avoid sudden changes where you can.

    Check the pipe now and then. A light surface film can usually be removed, but pitting means the pipe should be assessed before use.

    How often should a pipe rack be inspected, and what should I look for?icon-minus-redicon-plus-red

    Work equipment needs to be kept in good, safe working order, and racks are no exception. A sensible routine has three parts: staff report any damage as soon as they see it, a nominated person does a regular visual check, and a competent person carries out a more thorough inspection from time to time. How often depends on how heavily the rack is used and on the maker's instructions and your risk assessment.

    Look for bent or twisted arms and uprights, cracked welds, loose fixings, missing stops, worn or damaged wheels and brakes on mobile units, and any sign the rack leans or is uneven. Check that the data plate or load notice is still there and legible.

    Shop Similar Categories