WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
    Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

    Rapid Ref : STC-ULTRA-KIT  

    HMT VersaDrive ULTRA ETOP4 STAKIT Kit for Tough Steel
    STC-ULTRA-KIT

    £1299.00  EX VAT
    SSP Suggested Selling Price = £1527.85  YOU SAVE £228.85
     Buy in 3 easy interest free payments of £433.00† with

    The VersaDrive STAKIT ULTRA Kit has been developed to offer a comprehensive solution to drilling & countersinking the most challenging materials. With cutting tools from 6 - 26mm diameter and countersinking options up to 40mm, this kit is a must have for operatives in the quarrying/mining, heavy machinery/plant repair and defence sectors.

    Contents: 5 x CarbideMax ULTRA 55 TCT Broach Cutters 18, 20, 22, 24, 26mm 5 x VersaDrive ULTRA Drill Bits 6, 8, 10, 12, 14mm 1 x Weldon Shank ULTRA TCT Countersink 32mm, 90° 1 x ULTRA coated Tungsten Carbide MultiSink 40mm, 90° 5 x MultiSink Pilots 18, 20, 22, 24, 26mm 1 x VersaDrive Heavy Duty Magnet Drill Adapter 1 x VersaDrive® STAKIT ETOP4 Full Top Case

    HMT VersaDrive STAKIT Top Cases FAQs

    Practical answers on choosing and using top cases for impact drilling, reaming, threading and rivet removal bits.

    What is an impact reamer used for?icon-minus-redicon-plus-red

    On steel structures, holes in joining members are sometimes slightly out of line. A reamer removes a little material so the holes line up and the bolt can pass without force, and a tapered tip helps it enter holes that are not quite aligned.

    It is for correcting small misalignments, not for drilling new holes. Take off only the minimum needed, because enlarged holes can affect the joint. On structural steelwork, check the project specification and ask the designer or engineer before reaming, and do not use a reamer to cover up badly mismatched holes. Not every reamer is built for impact driver use, so check the maker's information.

    What is the difference between a thread die and a thread chaser?icon-minus-redicon-plus-red

    A thread die is a cutting tool that makes a new external thread on a bar or rod. A thread chaser is designed to clean, re-form and restore an existing thread that is dirty, rusty or lightly damaged.

    A cutting tool run over a damaged thread can remove more thread material than you want, so a chaser is the gentler choice where most of the thread is intact. Chasing only works if enough thread remains: if a bolt or stud is stripped, galled or badly mangled, replace it. Check the thread size and pitch first, and use cutting fluid when cutting a new thread.

    How do I remove a rivet with a drill?icon-minus-redicon-plus-red

    The usual method is to drill into the rivet head only, as far as the surface of the metal, so the head can be removed. The remaining shank is then driven out with a punch slightly smaller than the shank.

    The aim is to avoid distorting the metal or elongating the rivet hole, so keep the drill square to the work, drill no deeper than needed and support the part so it cannot move. Wear eye protection, and check the repair instructions for the equipment first, as some jobs call for a specific method.

    How long can I use an impact tool before vibration becomes a concern?icon-minus-redicon-plus-red

    There is no single safe time, because it depends on the tool, how it is used and the person. HSE gives a rough guide that hammer-action tools used for more than about 15 minutes a day, or some rotary and other action tools for more than about an hour a day, may mean a vibration exposure problem. Real limits depend on the maker's vibration data.

    Watch for tingling and numbness in the fingers, not being able to feel things, or loss of strength in the hands, and report them early. Check the maker's vibration figures and your employer's risk assessment, and plan job rotation and breaks to cut the time the tool is actually running.

    Shop Similar Categories