WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
    Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

    Rapid Ref : ZirconiatedTungsten  

    CK 0.8% Zirconiated (White) Tungsten Electrode, 175mm (7") Long
    ZirconiatedTungsten

    Select Option 
    Prices From £0.52 ex VAT

     

    0.8% ZIRCONIATED (WHITE) EWZr-8/WZ8

    Principal Oxide: 0.7-0.9% Zirconium Oxide

    NON-RADIOACTIVE. Best for use in the alternative current (A/C) for aluminium alloys and magnesium alloys using inverter or transformer-based constant current power sources. Balls, well, handle higher amperage than pure tungsten with less spitting, better arc starts and arc stability than pure tungsten.

    CK-TUNGSTEN-ELECTRODE-WHITE-DESCRIPTION-IMAGE

    Brochures & Manuals

    Tungsten Electrodes FAQs

    Straight answers to the questions people ask most when choosing and using tungsten electrodes for TIG welding.

    What do the colours on tungsten electrodes mean?icon-minus-redicon-plus-red

    The coloured band on the end of an electrode shows the type. Common examples are red for thoriated, grey for ceriated, white for zirconiated and green for pure tungsten. Lanthanated electrodes use several colours depending on the amount of oxide, and some other blends have colours that vary between makers.

    Colour codes are widely used, but always check the packaging, since a maker's colour may differ from what you expect. The band is often on the end that gets cut or ground off, so mark or keep track of the type once it has gone.

    Why do people avoid thoriated tungsten?icon-minus-redicon-plus-red

    Thoriated tungsten contains a mildly radioactive oxide. The electrode itself is normally low risk to handle, and the main concern is the dust from grinding, which can be breathed in or swallowed. For that reason many workshops now prefer non-radioactive types that perform similarly on DC.

    If you do use thoriated tungsten, follow the HSE guidance, the maker's instructions and your own risk assessment, particularly on grinding, dust control, storage and disposal.

    What diameter of tungsten do I need?icon-minus-redicon-plus-red

    The right diameter depends on the welding current, and the maker publishes a current range for each size. A tungsten that is too thin for the current overheats, melts at the tip and can shed particles into the weld. One that is too thick for low current gives an unstable, hard-to-start arc.

    Choose a diameter that covers your usual current, and check it fits your torch, since the collet and collet body must match the tungsten diameter. A thicker tungsten generally copes with more current.

    What length of tungsten should I use?icon-minus-redicon-plus-red

    Standard electrodes come in set lengths and most general-purpose torches take the common length. Shorter lengths are used in some small and compact torches, and can also be handy where space is tight.

    Check the length your torch and back cap can hold. As the electrode wears down with regrinding, you will eventually be left with a short stub, which should be replaced when it becomes too short to grip properly.

    Shop Similar Categories