WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
    Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

    Rapid Ref : 3M-750020  Mfr Ref : 750020

    3M Speedglas 100V Auto Darkening Filter. Shade 8 to 12 EW. 110 x 90mm Fitment 39113
    750020 3M-750020

    £185.07  EX VAT
    SSP Suggested Selling Price = £211.50  YOU SAVE £26.43
     Buy in 3 easy interest free payments of £61.69† with

    100 Series Parts FAQs

    Spare protection plates, filters, headbands, sweatbands, magnifying lenses and neck and ear covers for an auto-darkening welding helmet, and how to choose the right ones.

    How do I work out which spare parts fit my helmet?icon-minus-redicon-plus-red

    Start with the helmet itself. Look for the model marking on the shell, the filter and the headgear, and check the user manual, which normally lists the compatible spares. If you still have the old part, note any part number printed or moulded on it and measure its width and height.

    The HSE says PPE should be maintained using the correct replacement parts and following the manufacturer's replacement schedule. Plates, filters and headgear from one helmet series often do not fit another, even when they look alike, so do not rely on a 'looks the same' match. Our team can help you match a part if you send the details from the helmet.

    What is the difference between an inside and an outside protection plate?icon-minus-redicon-plus-red

    Both are clear, replaceable plates that protect the auto-darkening filter. The outside plate sits in front of the filter and takes the spatter, scratches and grinding dust. The inside plate sits between the filter and your face and protects the filter's inner surface from dust, sweat and scratches.

    Makers' manuals say the filter must only be used with the inside plate fitted, and that a damaged or pitted outside plate should be replaced, so do not weld with either plate missing. Plates are made for a particular helmet or filter size, so check the fit before ordering. A plate is a consumable part, so it is normal to replace it several times during the life of the filter.

    When should I replace a protection plate?icon-minus-redicon-plus-red

    There is no single interval that suits everyone, because it depends on the process, the amount of spatter and how often you weld. Inspect the plates before each shift. Replace an outside plate once it is pitted, scratched, cracked, hazy or too dirty to clean with a soft cloth, and replace an inside plate when it is damaged or when spatter stops you seeing clearly.

    A marked outer plate can also block light from the filter sensors and make an auto-darkening filter behave oddly. Replacing a plate early is better than damaging the filter behind it. Always follow the helmet manual.

    How do I choose the right shade range for a replacement filter?icon-minus-redicon-plus-red

    The shade you need depends on the welding process, the current you use and your own comfort, so look at the shade table in the helmet manual or the filter instructions rather than guessing. Many auto-darkening filters let you adjust the shade within a range, so a wider range suits a welder who changes process often.

    The older shade standard has been withdrawn and replaced by a newer international standard series, so older tables may be out of date. The HSE says welding filters should meet the relevant British and European standards, and a reputable supplier can help you choose. A dark setting is not a substitute for proper eye protection against stray arcs.

    Shop Similar Categories