Straight answers to the questions people ask most when choosing and using exothermic cutting equipment.
How does exothermic cutting work?

An exothermic cutting rod is a steel tube filled with metal rods. The rod is held in a torch, a stream of oxygen is fed through the tube, and the end of the rod is lit with an electrical spark or arc from a battery or welding power source. Once lit, the rod burns fiercely in the oxygen, giving off very intense heat that melts and blows away the material in front of it. It keeps burning as long as the oxygen flows.
Unlike ordinary gas cutting it needs no fuel gas, and it does not depend on the material burning in an oxygen jet, which is why it can cut things other processes cannot.
What can an exothermic torch cut?

It is used on materials that are hard to cut by other means: carbon steel, stainless steel, cast iron, aluminium and other non-ferrous metals, as well as slag, refractory material, concrete and brick. It also cuts through rusty, dirty, painted or corroded metal, where other processes struggle.
It is common in demolition, scrap cutting, maintenance and repair, and rescue and recovery work, and for cutting out seized or damaged parts. It makes a rough cut with a lot of molten material, so it is not used where a neat edge matters.
What do I need to start exothermic cutting?

You need a torch that holds the rods, oxygen from a cylinder with a regulator that can provide the high flow the torch needs, suitable oxygen hose, a source to light the rod (a battery or a welding power source, with the right lead and a striker or switch) and the rods themselves. Ready-made kits bring the main items together. The rods cannot be used in an ordinary electrode holder, because they need oxygen fed through them.
You also need full protective clothing, a face shield or welding helmet, gloves and sturdy boots, and a safe working area. Check that every item is rated for oxygen and for the flow involved, and follow the torch maker's instructions.
How does it compare with plasma and oxy-fuel cutting?

Exothermic cutting does not give a neat finish, and it is not meant to. Oxy-fuel gives a cleaner cut in steel, and plasma is faster and neater on conductive metals. What exothermic cutting offers is the ability to cut almost anything, including rusty, coated or non-metallic material, with simple equipment that can be used where mains power is limited, since a battery can light the rod.
The rods are used up as you cut, so it is not the right choice for long, repeated cuts. Choose it for demolition, repair and awkward jobs rather than for production cutting.