The website is working fine. Please feel free to place orders. WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
    Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

    Rapid Ref : PRLK  Mfr Ref : PR-LK

    Armorgard PipeRack Linking Kit for Armorgard PipeRack
    PR-LK PRLK

    £203.00  EX VAT
    SSP Suggested Selling Price = £234.55  YOU SAVE £31.55
     Buy in 3 easy interest free payments of £67.67† with

    Linking kit for joining two units together, allowing longer equipment to be stored and transported. Ideal for connecting two PipeRacks to accommodate 6 m lengths, it includes all required fixings.

    Brochures & Manuals

    BROCHURES & MANUALS
       View Brochure

    Pipe Storage FAQs

    Practical answers on choosing, loading and looking after pipe racks so your pipe stays safe, straight and clean.

    Can I store stainless steel pipe on the same rack as carbon steel pipe?icon-minus-redicon-plus-red

    It is best not to. Stainless steel stored against carbon steel can pick up iron particles and rust marks, which can spoil its corrosion resistance and its appearance. Where possible, keep stainless pipe on its own rack and away from areas where carbon steel is ground or cut, because the dust spreads.

    If you must share a rack, wrap the stainless pipe thoroughly and keep it clear of bare steel arms, straps and chains. Plastic, wood or similar protective sleeves on the contact points help, and forklift tines should be covered too.

    If the pipe has been in contact with carbon steel, clean the surface before it is welded or fitted.

    How do I stop carbon steel pipe rusting in storage?icon-minus-redicon-plus-red

    Moisture is the cause, so aim to keep the pipe dry. Rust develops faster as humidity rises, and condensation, rain and damp floors are the usual sources. Store pipe off the ground, ideally indoors in a dry, ventilated space.

    If pipe has to be stored outside, cover it with something that sheds water but still lets air move, because a sealed sheet can trap condensation underneath. Warm, damp air meeting cold steel is a common cause of condensation, so avoid sudden changes where you can.

    Check the pipe now and then. A light surface film can usually be removed, but pitting means the pipe should be assessed before use.

    How often should a pipe rack be inspected, and what should I look for?icon-minus-redicon-plus-red

    Work equipment needs to be kept in good, safe working order, and racks are no exception. A sensible routine has three parts: staff report any damage as soon as they see it, a nominated person does a regular visual check, and a competent person carries out a more thorough inspection from time to time. How often depends on how heavily the rack is used and on the maker's instructions and your risk assessment.

    Look for bent or twisted arms and uprights, cracked welds, loose fixings, missing stops, worn or damaged wheels and brakes on mobile units, and any sign the rack leans or is uneven. Check that the data plate or load notice is still there and legible.

    Do I need end caps on stored pipe?icon-minus-redicon-plus-red

    They are often worthwhile. Caps keep dust, moisture, swarf and small pests out of the bore, and they protect bevelled or threaded ends from knocks that would need re-machining before welding or fitting. This matters most for stainless steel, high-purity work and pipe with a coated or clean interior.

    Use caps that fit properly and do not trap moisture against the steel. Check they are all still in place when you take pipe from the rack, and replace any that are lost.

    If the inside of a pipe matters for the job, look inside before you use it and clean it if needed, even when caps were fitted.

    Shop Similar Categories