0 items in your basket
Total £ 0.00 EX VAT
SHOPS
Special Buys/Offers
Rapid Merchandise Shop
PATON Shop
GoGrid Shop
GasiQ Shop
CK Shop
Furick TIG Shop
GPPH Shop
Kemppi Shop
Spiderhand Shop
Optrel Shop
3M Shop
Plymovent Fume Extraction
Miller Shop
Elga Shop
CEPRO Shop
Bohler Welding Shop
SFE Shop
Hypertherm Shop
Lincoln Electric Shop
ESAB Shop
Fronius Shop
HMT Shop
Gullco Shop
FEIN Shop
SAIT Shop
Harris Shop
FANUCI & FALCON Shop
Jackson Safety Shop
Key Plant Automation Shop
Orbitalum Shop
Bessey Shop
Bester Shop
EWM Shop
MACHINES
Welding Machine Offers
Arc Welders
MIG Welders
TIG Welders
Plasma Cutters
Air Compressors
Engine Driven Welders
Battery Power Supplies
Generators
Fume Extraction
Sub Arc Machines
Weld Positioning Equipment
Cutting Equipment
Spot Welders
Stud Welders
Used Machines
LC Laser Shop
ARC
MMA Electrodes
Cable Sets
Earth Clamps
Electrode Holders
Cable Connectors
Welding Cable
Welding Helmets
Arc Accessories
Rod Ovens
Learning
Exothermic Cutting
Chemical Aids
Gouging
MIG
MIG Filler Wire
MIG Torches & Parts
Site Wire Feeders
MIG Regulators
Ceramic Backing Tiles
MIG Accessories
TIG
TIG Torches
TIG Torch Parts
Tungsten Electrodes
TIG Filler Wire
Machine Remotes
TIG Accessories
Cold Wire Feeders
TIG Gauntlets
Tung Buddy
Tungsten Sharpening
Weld Cleaning
Gas Purging Tools
LASER
Laser Welders
Laser Cleaners
Laser Accessories
PLASMA
Plasma Torches
Plasma Torch Consumables
Lincoln Cutting Tables
GAS
Cutting & Welding Outfits
Gas Regulators
Flashback Arrestors
Gas Hoses & Fittings
Gas Torches
Gas Cutting Nozzles
Gas Welding & Heating Nozzles
Gas Accessories
Gas Welding & Brazing Rods
Gas Bottle Trolleys
Gas Cutting Machines
Quick Action Couplings
Regulator Accessories
Gas Analysers
SAFETY
Helmet Spares
Air Fed Welding Helmets
Swiss Air System
Goggles
Welding Blankets
Spectacles
Visors
Welding Curtains
Ear Protection
Safety Helmets
Monkey Masks
Gloves
Caps & Hoods
Leather Welding Clothing
Overalls
Weldline Female PPE
Disposable Masks & Respirators
WORKSHOP
Build your own GPPH Welding Table
Magnetic Drilling
Rapid Pipe Shop
Bevelling Machines
Automation
Metal Markers
Inspection Equipment
Pipework Equipment
Site Equipment
Exact Pipe Cutting Machines
Welding Rotators
Welding Tables
Bandsaws & Blades
TORCH &MACHINE SPARES
Pipe Cutting Machine Accessories
Parts for CO2 Laser
Kemppi MIG Parts
Machine Parts
Plasma Welding Torches
Water Coolers
Binzel MIG Parts
Tungsten Grinder Parts
WIRE, FLUX & RODS
Brazing Flux
Sub Arc Wire & Flux
ABRASIVES
3M Abrasives
SAIT Abrasives
Spectre Abrasives
Other Brand Abrasives
Backing Pads
Finishing & Polishing Products
Wire Brushes
Abrasive Belts
TOOLS
Angle Grinders
Right Lines Tool Offers
Magnetic Tools
Welding Clamps
Pipe Fit Up Tools
Site Storage
Orbitalum Pipe Machines
Orbitalum GF Sawblades
KNOWLEDGECENTRE
SERVICEDEPT.
RAPID BLOG
FEEDBACK
HIRE
Answers to common questions about internally clamped boiler tube preparation machines, from choosing a clamp kit to safe use and care.
It is a portable machine that grips the tube from the inside and then machines the tube end ready for welding. Clamps fit inside the bore and expand against a mandrel to centre and hold the machine, and a rotating head carries the cutting tools around the tube end.Machines of this type can usually face the tube end square, cut the bevel and bore the inside edge in one set-up, depending on the tooling fitted. The data plate and manual give the tube size and wall thickness the machine is designed for.
The bevel gives the welder access to the root of the joint so the first pass can fuse properly. Poor preparation is a recognised cause of incomplete root fusion: a root face that is too thick, a root gap that is too small, or a bevel angle that is too small can all stop the arc reaching the root.The bevel angle, root face and root gap are normally set by the welding procedure for the job, so cut to that. A machined bevel is uniform all round the tube, which makes it easier to hold the correct gap than hand grinding does.
A machine like this removes metal with cutting tools rather than heat. Thermal cutting creates a heat-affected zone, a band of metal beside the cut whose properties have changed, and these changes are usually undesirable because they can reduce toughness or corrosion resistance and increase the risk of cracking.Mechanical preparation avoids that zone and leaves a clean, square face ready for welding. It also removes the oxidised edge that thermal cutting leaves, which would otherwise need grinding off. Follow the maker's advice for the material being cut.
Stop the machine and make sure the moving parts have stopped, then isolate the power supply before you touch the tooling. For an air-driven machine that means shutting off and disconnecting the air, and releasing any stored pressure so nothing can move or cycle unexpectedly.Most maintenance should be done with the power off, and the machine should be locked off if there is any chance it could be switched back on by someone else. Follow the maker's instructions, and make sure the person doing the work is competent to do it.
Your risk assessment decides, but it will normally include eye protection suited to flying chips and swarf, and hearing protection where the machine is noisy. The HSE explains that PPE must be assessed as suitable before use, maintained and stored properly, and that users need instruction and training in it.Keep clothing close-fitting and hair tied back. Regulators warn that gloves can increase the risk of entanglement and are not acceptable near rotating parts, so do not wear loose gloves while the head is turning. Handle sharp swarf and freshly cut ends only when the machine has stopped.
Chatter generally points to a lack of rigidity. Machining guidance from cutting tool makers lists a weak fixture or poor clamping, worn tools and cutting data that is too aggressive among the usual causes of vibration and poor surface finish.Stop, re-seat and re-tighten the clamp, check the tool bits for wear or damage, and reduce the feed. Clean the inside of the tube so the clamp grips properly, and check the manual for the recommended settings for the material. A rough or noisy cut is a sign to stop and investigate, not to push on.