WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
    Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

    Rapid Ref : CK-T3329S20GC2  Mfr Ref : T3329S20GC2

    CK Ceriated Tungsten 2.4mm for Micro Torch (Pack of 5)
    T3329S20GC2 CK-T3329S20GC2

    £65.46  EX VAT
    SSP Suggested Selling Price = £109.10  YOU SAVE £43.64
     Buy in 3 easy interest free payments of £21.82† with

    Micro Torch Parts FAQs

    Straight answers to the questions people ask when choosing and looking after the tungstens, cups, collets and small spares for a compact micro TIG torch.

    What is a micro TIG torch and what is it used for?icon-minus-redicon-plus-red

    A micro TIG torch is a miniature air-cooled or water-cooled torch with a very small head and a slim handle. It is made for precision work on thin metal, small components and awkward positions where a full-size torch will not fit or is too heavy to control.

    Typical uses include aerospace and instrument work, artistic metalwork and very thin sheet. Because the head is small, the torch is rated for a lower maximum current than a full-size torch, so check the rating on the torch before you plan the job. The small spares for it (cups, collets, bushings and short tungstens) are different sizes from full-size parts, so do not assume they swap.

    What tungsten diameter should I use in a micro torch?icon-minus-redicon-plus-red

    As a rule, the lower the current, the smaller the tungsten diameter and tip angle. A tungsten that is too large for the current can give an unstable arc and hard starting, while one that is too small will overheat and erode at higher current.

    For very thin material and low current, the finer diameters that micro torches are designed for are usually the right choice. Move up a size as the thickness and current rise, and keep within the current range the electrode maker gives for that diameter. The torch collet and collet body must match the tungsten diameter, so choose the electrode size first and then the matching small parts.

    What should I do if my tungsten touches the weld pool?icon-minus-redicon-plus-red

    Stop and re-grind it. Touching the pool, or touching the filler rod to the electrode, contaminates the tip. A contaminated tungsten typically gives a wandering, unsteady arc, can cause porosity, and can leave tungsten inclusions in the weld.

    Break or cut off the contaminated end, then re-sharpen the tungsten properly before you continue. If the contamination is severe, fit a new electrode. Hotter pools tend to contaminate the tungsten faster, so keep a steady arc length and a steady hand, and keep spare short tungstens to hand. Using a tungsten with a damaged tip will only make the starting and arc problems worse.

    Should I use a clear glass cup or a ceramic cup on a micro torch?icon-minus-redicon-plus-red

    A clear borosilicate glass cup lets you see the tungsten and the pool, which helps in corners and tight spaces. It is a good choice for small, close-up work and for learning, because you can see where the electrode is.

    The trade-offs are that glass is brittle and does not suit being dragged or walked across rough surfaces, and it can cloud with fume deposits over time. A ceramic (alumina) cup is the tougher option and is usually what comes fitted to a torch. Replace any cup that is cracked, chipped or badly clouded, and choose the cup that is made for your torch style, as cups are not interchangeable between torch types.

    Shop Similar Categories