WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
    Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

    Rapid Ref : 133820R150  

    ESAB OK Tigrod 13.38 2.0mm TIG Wire, 5Kg Pack, ER90S-B9
    133820R150

    £529.25  EX VAT
    SSP Suggested Selling Price = £595.69  YOU SAVE £66.44
     Buy in 3 easy interest free payments of £176.42† with

    The OK Tigrod 13.38 is a non-copper coated, low alloyed, 9CrMoVN rod for the GTAW of high-temperature steels and steels for hot hydrogen service, especially in oil refineries. It is particularly effective when used with 9% Cr steels, such as P 91/T 91 steels. The alloy is modified in terms of the limits for impurity elements and is extremely "clean". This meticulous modification results in improved strength levels that are noticeable both at room temperature and at higher temperatures. AWS has recognised this improvement and changed the classification for this product from A5.9 ER505.

    Brochures & Manuals

    BROCHURES & MANUALS
       View Brochure

    ESAB Consumables FAQs

    Practical answers on choosing, storing and using welding wire and stick electrodes.

    How do I read the classification code on a stick electrode?icon-minus-redicon-plus-red

    Most stick electrodes carry a classification code on the pack, for example a letter E followed by digits. Taking a common low hydrogen code as an example: E means a stick electrode, the first two digits give the minimum tensile strength of the weld metal, the next digit shows the positions it can be used in, and the last digit tells you about the coating type and the current it needs. Extra suffixes can show a hydrogen limit or better impact toughness.

    Wire and rod codes follow their own patterns, so read the maker's data sheet or the standard named on the pack. Always match the code to the strength and type of the steel you are welding.

    How do I choose the right MIG wire diameter and shielding gas?icon-minus-redicon-plus-red

    Wire diameter and wire feed speed together set the welding current, because the wire burns off at a rate that settles in balance with the feed speed. Thicker material and higher current generally call for a larger diameter, while thin sheet suits finer wire. Your welder's manual and the wire data sheet show which diameters the machine is built for.

    For steels, typical shielding gases are carbon dioxide or argon mixed with carbon dioxide or a little oxygen. Non-ferrous metals normally use argon. The right gas depends on the wire, the metal and the transfer mode, so follow the wire maker's recommendation.

    What is the difference between solid wire and flux-cored wire?icon-minus-redicon-plus-red

    Solid wire is a single strand and needs an external shielding gas. It usually gives little spatter and no slag to chip off, which suits clean, thinner work where appearance matters. Flux-cored wire is a tube filled with flux. Some types still use gas, while self-shielded types do not, which helps outdoors where wind can blow gas away.

    Flux-cored wire generally tolerates dirtier or scaled steel and is often chosen for thicker material and higher deposition, but with slag to remove afterwards. Neither is better in every case. Choose by thickness, location, gas supply and what your welder is designed to run.

    How do I match a TIG filler rod to the metal I am welding?icon-minus-redicon-plus-red

    The weld pool is a mixture of the parent metal and the filler, so the rod is normally chosen to suit the parent metal. Carbon steel, low alloy steel and stainless each have their own rods, and low alloy heat-resistant steels need a rod made for that alloy. Using a general-purpose rod on everything is a common mistake.

    In TIG the filler is added to the weld pool by hand, separately from the arc, and argon is the usual gas for steels and stainless. Check the rod's data sheet or the standard named on its pack, and follow your welding procedure if the job is specified.

    Shop Similar Categories