WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
    Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

    Rapid Ref : 108030-5SET  

    HMT CarbideMax 40 TCT Broach Cutter 5 Piece Set (12, 14, 18, 22, 26mm) & 2 Pilot Pins
    108030-5SET

    Click here to see what's included

    £182.84  EX VAT
    SSP Suggested Selling Price = £215.10  YOU SAVE £32.26
     Buy in 3 easy interest free payments of £60.95† with

    The CarbideMax 40 Series will broach up to 35mm thickness of metal: UP TO 4X LONGER LIFE AND 15% FASTER CUT THAN HSS CUTTERS.

    Tungsten Carbide, one of the hardest materials used for cutting tools, can drill through the toughest steels. HMT CarbideMax TCT Broach cutters are tipped with individually brazed cutting teeth of the highest quality tungsten carbide. They are designed with an elaborate cutting geometry, resulting in faster, quieter, easier drilling and chatter-free performance. Furthermore, because the teeth of the cutter are doing all of the hard work, less strain is put on the wall of the cutter. Therefore, the thinner wall means less metal is removed, giving a faster cut.

    HMT CarbideMAX TCT 40 Cutters FAQs

    Straight answers to the questions people ask most when choosing and using 40 depth tungsten carbide tipped broach cutters.

    What is a general-purpose TCT broach cutter used for?icon-minus-redicon-plus-red

    A broach (annular) cutter removes a ring of metal and leaves a solid slug, so it cuts faster and needs less power than a twist drill of the same diameter. Each cutter has a stated maximum depth of cut, normally in millimetres.

    Medium-depth cutters are a general-purpose choice for structural steel sections, plate and fabrication work where holes pass through moderate thicknesses. Tungsten carbide tipped teeth keep their edge in tough materials such as stainless and high tensile steel, provided the machine is rigid.

    How do I choose between single cutters, sets and starter kits?icon-minus-redicon-plus-red

    Single cutters suit one-off or repeat jobs at a known diameter. Sets of several cutters with pilot pins make sense if you drill a range of common sizes, for example bolt clearance holes. A starter kit with a storage case covering a run of small to medium sizes is good for those building up a tool kit.

    Look at the diameters you drill most often and pick the option that covers them with the right pilot pins included.

    Which pilot pin fits my cutter?icon-minus-redicon-plus-red

    Pilot pins are matched to the cutter depth series and to a diameter range. Check the diameter of your cutter against the range stated on the pin, and confirm the pin is for the same depth series.

    Small diameter ranges and larger ranges often use different pins, so a pin that fits one cutter may not suit another. Packs of several pins are handy because pins are small, wear, and are easily lost or bent. Check the markings if you are unsure.

    What machine should I use with TCT cutters?icon-minus-redicon-plus-red

    Use a rigid magnetic drill in good condition with a clean, strong magnetic grip on flat steel, and check that the shank type matches your machine. TCT teeth chip if the machine moves or vibrates.

    Annular cutters should not be used in handheld drills, because side loading can break the cutter and cause injury. Check the speed range on the data plate and in the manual for your machine and match it to the diameter and material you are cutting.

    Shop Similar Categories