WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
    Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

    Rapid Ref : 40101  

    Jackson Translight Flip 455 PAPR Welding Helmet, with Headgear & Face Seal (No ADF incl.)
    40101

    £151.39  EX VAT
    SSP Suggested Selling Price = £178.10  YOU SAVE £26.71
     Buy in 3 easy interest free payments of £50.46† with

    Jackson Translight 455 with Airmax+ System Parts FAQs

    Spares and consumables for a powered air welding helmet system, and how to work out the right ones for your unit.

    What should I check on a powered air helmet system before each use?icon-minus-redicon-plus-red

    The HSE says respiratory protective equipment must be thoroughly inspected before each use, and that you should keep records of regular examinations, maintenance and repairs for reusable equipment.

    In practice, look at the hose for splits or kinks, the helmet seals for tears or burn holes, the filter for damage, and the battery for charge and damage. Then switch on and confirm the airflow and any alarms work as the manual describes. Do not weld if something fails the check.

    Why is a powered air helmet a good choice for welding, and what does that mean for spares?icon-minus-redicon-plus-red

    The HSE describes a powered or supplied-air respirator that combines respiratory, eye and face protection as the best option for arc welders, and says it needs an assigned protection factor of at least 20.

    The protection depends on the whole system working together, so spares need to be parts the maker intends for your unit: blower, filters, hose, seals and headgear. Parts that look similar but are not approved for your system can change the airflow or fit, so check the manual before ordering.

    Who can service or repair a powered air unit?icon-minus-redicon-plus-red

    The HSE says the wearer may be able to carry out simple maintenance such as cleaning, but that more intricate repairs should be carried out by a competent person. Follow the maker's schedule for examination, replacement and testing.

    Changing a hose, filter or seal is often straightforward, but opening the blower or replacing electronic parts is not a job for the user. Keep any records your employer's RPE programme requires.

    What does the hose do, and when should it be replaced?icon-minus-redicon-plus-red

    The hose carries filtered air from the blower to the helmet. Maker guidance generally says to inspect it before use and replace it if it is cracked, deformed, kinked permanently or leaking.

    Spatter and abrasion are the usual causes of damage. A hose cover or flame-resistant sleeve helps protect it, but check the hose under the cover as well, because damage can be hidden. Do not tape over a split and carry on, since leaks reduce the air reaching you.

    Shop Similar Categories