WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
    Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

    Rapid Ref : 108030-SS1  

    HMT CarbideMax 40 TCT Broaching InsertFoam 12 Piece Starter Kit (6 - 26mm)
    108030-SS1

    Click here to see what's included

    £387.98  EX VAT
    SSP Suggested Selling Price = £456.45  YOU SAVE £68.47
     Buy in 3 easy interest free payments of £129.33† with

    Drill, broach, and countersink thick, heavy-duty metal with the HMT Broaching Starter Set. Tooling within the kit offers solutions for creating holes from 6mm up to 26mm and countersink up to 30mm using magnet drills with a standard 19.05mm (3/4") Weldon arbor.

    Supplied in a Large InsertFoam compatible with STAKIT ETOP2 and STAKIT ETOP4 Top Cases.

    Set includes

    • 6, 8, 10, 10.2, 12mm Weldon Twist Drills
    • 14, 18, 20, 22, 24, 26mm CarbideMax 40 TCT Broach Cutters
    • 2 Pilot pins for CarbideMax 40 Broach Cutters
    • 30mm GoldMax Countersink

    Brochures & Manuals

    BROCHURES & MANUALS
       View Brochure

    HMT CarbideMAX TCT 40 Cutters FAQs

    Straight answers to the questions people ask most when choosing and using 40 depth tungsten carbide tipped broach cutters.

    What is a general-purpose TCT broach cutter used for?icon-minus-redicon-plus-red

    A broach (annular) cutter removes a ring of metal and leaves a solid slug, so it cuts faster and needs less power than a twist drill of the same diameter. Each cutter has a stated maximum depth of cut, normally in millimetres.

    Medium-depth cutters are a general-purpose choice for structural steel sections, plate and fabrication work where holes pass through moderate thicknesses. Tungsten carbide tipped teeth keep their edge in tough materials such as stainless and high tensile steel, provided the machine is rigid.

    How do I choose between single cutters, sets and starter kits?icon-minus-redicon-plus-red

    Single cutters suit one-off or repeat jobs at a known diameter. Sets of several cutters with pilot pins make sense if you drill a range of common sizes, for example bolt clearance holes. A starter kit with a storage case covering a run of small to medium sizes is good for those building up a tool kit.

    Look at the diameters you drill most often and pick the option that covers them with the right pilot pins included.

    TCT or HSS: which is better for my work?icon-minus-redicon-plus-red

    TCT cutters last longer in hard, abrasive or work-hardening materials and can cut at higher speeds on a rigid machine. They are the usual choice for stainless, thick structural steel and production drilling.

    HSS cutters are tougher against vibration and are often kinder in less rigid set-ups. For occasional mild steel work they can be perfectly adequate. Choose by material, machine rigidity and how many holes you drill.

    What machine should I use with TCT cutters?icon-minus-redicon-plus-red

    Use a rigid magnetic drill in good condition with a clean, strong magnetic grip on flat steel, and check that the shank type matches your machine. TCT teeth chip if the machine moves or vibrates.

    Annular cutters should not be used in handheld drills, because side loading can break the cutter and cause injury. Check the speed range on the data plate and in the manual for your machine and match it to the diameter and material you are cutting.

    Shop Similar Categories