WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
    Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

    Rapid Ref : 115820-SET  

    HMT VersaDrive ImpactaDie Threader Complete Kit - UNC Sizes
    115820-SET

    Click here to see what's included

    £322.32  EX VAT
    SSP Suggested Selling Price = £379.20  YOU SAVE £56.88
     Buy in 3 easy interest free payments of £107.44† with

    Create external threads quickly and easily with this unique patent-pending impact die system.

    Ideal for creating /extending new threads, repairing existing damaged /deformed threads, or cleaning old threads clogged with surface coatings, rust or other unwanted material that can prevent threads from matting and turning properly.

    The guide collar system ensures the thread-cutting process runs straight and true. Once a thread is established, the flush-type collar can be used.

    • Guided threading for straight & true results
    • Use with Impact Wrenches
    • Create external threads up to 50mm long
    • Clean out existing external threads
    • Impact Chipbreaker action for effective swarf evacuation
    • Use on Impact to prevent dangerous kickback
    • VersaDrive patented shank and modular adaptors provide unbeatable jobsite flexibility
    • Impact-rated due to dual hardening process - allows up to 15 times faster speed than traditional methods

    Brochures & Manuals

    BROCHURES & MANUALS
       View Brochure

    HMT ImpactaDie Threader FAQs

    Answers on choosing and using impact-driven die threaders to cut, extend, clean and repair external threads.

    How do I work out the thread size and pitch I need?icon-minus-redicon-plus-red

    You need two values: the outside (major) diameter and the pitch. Measure the diameter across the crests of the thread with calipers, then try the leaves of a thread pitch gauge until one sits fully along the thread, and read the number stamped on it.

    Metric threads are stated as diameter by pitch in millimetres, for example M8 x 1.25. Inch threads are stated as threads per inch. Compare your result against a thread table, and check that a matching nut runs on smoothly by hand. If the nut does not turn freely, stop and re-check instead of forcing it, because that can damage both parts.

    Do I need to chamfer the end of the bar first?icon-minus-redicon-plus-red

    Yes, it helps. Die-threading guidance says to chamfer or bevel the end of the rod or bar before cutting, so the die can start square and grip properly.

    Some kits include a chamfering tool for this. Without a chamfer, the die may start badly, bind or cut a rough first thread. Remove any burr left from cutting the bar, and check that the end is clean and square before starting. Follow the instructions supplied with your kit for the size of chamfer.

    How do I clear swarf and avoid the die jamming?icon-minus-redicon-plus-red

    The usual die-threading technique is to turn forward for a short way, then ease back slightly to break the chip. This also lets fresh lubricant reach the cutting edges. An impact die has a chip-breaking action built into it, but it still pays to check the die and holder or collar periodically and clear any swarf that builds up.

    Keep the tool square to the work and avoid sideways movement or tilting, which can damage the die. Apply firm forward pressure when starting the cut and when reversing off the thread. If the die stalls, back off and clear it instead of forcing it.

    Can I use it to clean up or repair a damaged thread?icon-minus-redicon-plus-red

    Yes, a die is often used on external threads that are rusty, clogged with coating or lightly deformed, to clean up bolts and studs. Use the collar designed for cleaning and rethreading so the die can run the full length of the thread.

    Be aware that a cutting die removes some metal, whereas a thread chaser reforms the existing thread without removing material. Where a thread is badly damaged, worn or missing too much material, replacing the part is usually safer than trying to rescue it. Always match the die to the exact diameter and pitch of the thread.

    Shop Similar Categories