Jackson Translight 455 with Airmax+ System Parts FAQs
Spares and consumables for a powered air welding helmet system, and how to work out the right ones for your unit.
What should I check on a powered air helmet system before each use?

The HSE says respiratory protective equipment must be thoroughly inspected before each use, and that you should keep records of regular examinations, maintenance and repairs for reusable equipment.
In practice, look at the hose for splits or kinks, the helmet seals for tears or burn holes, the filter for damage, and the battery for charge and damage. Then switch on and confirm the airflow and any alarms work as the manual describes. Do not weld if something fails the check.
Can I mix parts from different makers or different helmet models?

It is best not to. The protection of a powered air system depends on the blower, hose, filters and head top being used as a tested combination, and the HSE says an RPE programme should cover compatibility with other protective equipment such as welding visors.
Use the combination your manual lists. If you are not sure that a part suits your unit, check the data plate, the manual and the markings on the old part, or ask our team to help identify it.
How do I look after the battery and charger?

Check the battery for damage, leaking or swelling before use, and charge it as the manual says. Store batteries within the maker's temperature and humidity limits, because heat can reduce capacity and airflow.
Use the charger intended for your battery, not a similar-looking one. If airflow drops quickly during use, leave the area where fume is present and then replace or recharge the battery in clean air. Dispose of old batteries as the maker and local rules require.
What does the hose do, and when should it be replaced?

The hose carries filtered air from the blower to the helmet. Maker guidance generally says to inspect it before use and replace it if it is cracked, deformed, kinked permanently or leaking.
Spatter and abrasion are the usual causes of damage. A hose cover or flame-resistant sleeve helps protect it, but check the hose under the cover as well, because damage can be hidden. Do not tape over a split and carry on, since leaks reduce the air reaching you.