WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
  • 805036  HMT Steelbor Cordless V36-18 Magnet Drill Kit with STAKIT Base 200 Case, 2x Batteries & Charger
  • 805036  HMT Steelbor Cordless V36-18 Magnet Drill Kit with STAKIT Base 200 Case, 2x Batteries & Charger
  • 805036  HMT Steelbor Cordless V36-18 Magnet Drill Kit with STAKIT Base 200 Case, 2x Batteries & Charger
  • 805036  HMT Steelbor Cordless V36-18 Magnet Drill Kit with STAKIT Base 200 Case, 2x Batteries & Charger
  • 805036  HMT Steelbor Cordless V36-18 Magnet Drill Kit with STAKIT Base 200 Case, 2x Batteries & Charger
  • 805036  HMT Steelbor Cordless V36-18 Magnet Drill Kit with STAKIT Base 200 Case, 2x Batteries & Charger
  • 805036  HMT Steelbor Cordless V36-18 Magnet Drill Kit with STAKIT Base 200 Case, 2x Batteries & Charger
  • 805036  HMT Steelbor Cordless V36-18 Magnet Drill Kit with STAKIT Base 200 Case, 2x Batteries & Charger
Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

Rapid Ref : 805036  

HMT Steelbor Cordless V36-18 Magnet Drill Kit with STAKIT Base 200 Case, 2x Batteries & Charger
805036

Select Option 
Prices From £1701.00 ex VAT

Increase your job site solutions with this unique cordless Mag drill, the most compact & lightweight unit in its class. Market-leading 140mm stroke, which is ideal for extra-long broach cutters and VersaDrive cutting tools. The 18V, battery pack is compatible with the entire range of Makita LXT power tools. A permanent magnet provides a safe & powerful hold, even on thin materials, eliminating any risk of power failure to the magnet.

  • Up to 49 x 18mm holes per charge (on 10mm plate)
  • Weighs just 9.8Kg for easy handling

Product Details

Brochures & Manuals

HMT Mag Drills FAQs

Straight answers to the questions people ask most when choosing and using magnetic drilling machines.

What is a magnetic drill and what is it used for?icon-minus-redicon-plus-red

A magnetic drill is a portable drilling machine with a powerful electromagnet in its base. When switched on, the magnet clamps the machine firmly to steel, so you can drill accurate holes on site or in the workshop without a drill press.

It is mainly used with annular (hollow core) cutters to make clean holes in structural steel, plate, beams, channel, pipe and fabrications. It is widely used in steel erection, fabrication, shipbuilding, rail and plant maintenance.

What can a magnetic drill be fixed to, and what affects the magnet's grip?icon-minus-redicon-plus-red

The magnet only holds well on ferrous steel. It will not grip aluminium, stainless steels that are non-magnetic, copper or plastics, so those need a clamp, vacuum base or other fixing method.

Holding force depends on the thickness, flatness and cleanliness of the steel. Thin sheet, rough or painted surfaces, rust, swarf under the base and curved surfaces all reduce the grip. Clean the surface and the magnet face, and use the manufacturer's guidance on minimum material thickness. On pipe or uneven work, use a suitable pipe or V-base and a safety chain or strap.

Which cutters and accessories do I need with a magnetic drill?icon-minus-redicon-plus-red

Most magnetic drills are used with annular cutters, which cut only the outer ring of the hole and leave a slug of metal. These are quicker and need less power than a twist drill. You also need a pilot pin matched to the cutter, an arbor or adaptor that fits the spindle, and a suitable cutting fluid.

A twist drill chuck adaptor or a tapping attachment may be useful for small holes or threads. Always check that the cutter shank type matches your machine's spindle before choosing.

What speed and feed should I use?icon-minus-redicon-plus-red

Larger cutters need slower speeds and smaller cutters faster ones, and harder or tougher materials such as stainless steel need slower speeds than mild steel. A variable speed machine lets you match the speed to the cutter and the job.

Feed steadily with even pressure and let the cutter do the work. Forcing it overloads the motor and chips the teeth; too light a feed makes it rub and blunt. The cutter manufacturer's speed recommendations should be your starting point. Listen for the sound: a steady cut and a continuous swarf curl suggest you are close.

Shop Similar Categories