WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
  • OD26-850236  HMT OD26 Steelbor S36 Compact Magnet Drill with Site Case & CarbideMax 55 TCT Cutter Set
  • OD26-850236  HMT OD26 Steelbor S36 Compact Magnet Drill with Site Case & CarbideMax 55 TCT Cutter Set
  • OD26-850236  HMT OD26 Steelbor S36 Compact Magnet Drill with Site Case & CarbideMax 55 TCT Cutter Set
Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

Rapid Ref : OD26-850236  

HMT OD26 Steelbor S36 Compact Magnet Drill with Site Case & CarbideMax 55 TCT Cutter Set
OD26-850236

Select Option 
Prices From £359.00 ex VAT

Save £399 with this limited time offer! Valid until December 21st.

The S36 delivers deeper cuts, faster job turnaround, and site-ready durability - all in a compact, portable form. Built to outperform other compact drills, the S36 combines a 110mm cutting depth with a high power Eibenstock motor. Designed for structural steel and access critical jobs, it pairs perfectly with VersaDrive tooling and standard broach cutters for fast. Flexible holemaking.

  • 110mm cutting depth for deep broaching & countersinking
  • Lightweight for easier transport and access work
  • Drills up to 36mm diameter in structural steel
  • Weldon shank compatible for full cutter flexibility
  • High-performance motor delivers smooth, fast cutting
  • Drill & countersink using VersaDrive quick-change tools

Product Details

Brochures & Manuals

BROCHURES & MANUALS
   View Brochure

HMT JS26 Promotion FAQs

Answers to common questions about the impact-rated drilling, tapping, reaming, extraction and burring accessories found in these sets.

Why do I need impact-rated accessories with an impact wrench or driver?icon-minus-redicon-plus-red

Impact tools hit the fastener with a series of sharp blows, and it is the shock of each blow, more than the torque itself, that damages brittle accessories. Standard chrome sockets and similar items can break, and the fragments can strike the face, eyes and hands.

Impact-rated accessories are made thicker and from tougher, less brittle steel to take that shock, and are normally marked or finished differently. Always use accessories that the maker states are suitable for impact use, and wear safety glasses.

How should I check and look after impact accessories?icon-minus-redicon-plus-red

Inspect each accessory before every use. Look for cracks, chipped or rounded edges, worn drive ends and any flaking of the surface, and put damaged items aside rather than using them.

Keep cutting tools sharp, because blunt cutters need more force and increase vibration. Wipe them clean after use, store them in their case so edges are protected, and follow the maker's instructions. Anything that has been dropped, overheated or used beyond its rating should be treated with suspicion.

Do impact tools cause hand-arm vibration problems?icon-minus-redicon-plus-red

They can. Hand-held power tools are a known cause of hand-arm vibration syndrome. The HSE says tingling or numbness after using a power tool may be a sign of a problem, and gives a rough guide that regular use of hammer-action tools for more than about 15 minutes a day may mean an exposure problem.

Compare the vibration information supplied with tools, use the right tool for the job, keep tools and cutters in good condition, and report symptoms early. Your employer's risk assessment should cover this.

What size hole should I drill before tapping?icon-minus-redicon-plus-red

There is no single correct drill size for a tap. The size shown on most charts gives a thread that is strong but needs quite a lot of torque to cut. A slightly larger hole gives a little less thread engagement but makes tapping easier, which is often the better choice in deep holes or tough materials.

Check the thread size and pitch, then use the maker's tap drill chart. A combined drill and tap does this in one step, so the size is built in, but the material still needs to suit the tool.

Shop Similar Categories