WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
  • OD26-850250  HMT OD26 Steelbor S50 Dual Speed Magnet Drill with Site Case & CarbideMax 55 TCT Cutter Set
  • OD26-850250  HMT OD26 Steelbor S50 Dual Speed Magnet Drill with Site Case & CarbideMax 55 TCT Cutter Set
  • OD26-850250  HMT OD26 Steelbor S50 Dual Speed Magnet Drill with Site Case & CarbideMax 55 TCT Cutter Set
  • OD26-850250  HMT OD26 Steelbor S50 Dual Speed Magnet Drill with Site Case & CarbideMax 55 TCT Cutter Set
Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

Rapid Ref : OD26-850250  

HMT OD26 Steelbor S50 Dual Speed Magnet Drill with Site Case & CarbideMax 55 TCT Cutter Set
OD26-850250

Select Option 
Prices From £499.00 ex VAT
 Buy in 3 easy interest free payments of £166.33† with

Save £356.60 with this limited time offer! Valid until December 21st.

The S50 combines compact power with 2-speed control — ideal for heavy drilling and versatile site work up to 55mm. Positioned between ultra-compact and high torque models, the S50 delivers reliable, all-day performance for broaching, reaming and countersinking. With a 160mm stroke, it accepts long cutters and integrates seamlessly with both VersaDrive & Weldon tooling systems.

  • 2-speed motor for cutting control and material flexibility
  • Drills up to 55mm diameter with TCT cutter performance
  • 160mm stroke supports long broach cutters & reamers
  • Protective case and accessories supplied as standard
  • VersaDrive adapter available for modular system use
  • Ideal for structural and fabrication shop environments

Product Details

Brochures & Manuals

BROCHURES & MANUALS
   View Brochure

HMT JS26 Promotion FAQs

Answers to common questions about the impact-rated drilling, tapping, reaming, extraction and burring accessories found in these sets.

Why do I need impact-rated accessories with an impact wrench or driver?icon-minus-redicon-plus-red

Impact tools hit the fastener with a series of sharp blows, and it is the shock of each blow, more than the torque itself, that damages brittle accessories. Standard chrome sockets and similar items can break, and the fragments can strike the face, eyes and hands.

Impact-rated accessories are made thicker and from tougher, less brittle steel to take that shock, and are normally marked or finished differently. Always use accessories that the maker states are suitable for impact use, and wear safety glasses.

Do impact tools cause hand-arm vibration problems?icon-minus-redicon-plus-red

They can. Hand-held power tools are a known cause of hand-arm vibration syndrome. The HSE says tingling or numbness after using a power tool may be a sign of a problem, and gives a rough guide that regular use of hammer-action tools for more than about 15 minutes a day may mean an exposure problem.

Compare the vibration information supplied with tools, use the right tool for the job, keep tools and cutters in good condition, and report symptoms early. Your employer's risk assessment should cover this.

Should I wear gloves when drilling, and how should I clear swarf?icon-minus-redicon-plus-red

Be careful with gloves near rotating tools. The HSE advises that gloves should not be worn close to rotating machinery such as drills and lathes, where they can be caught. Whatever you are using, keep loose clothing, cuffs, long hair and jewellery clear of the spinning part.

Wear eye protection that suits the task. Stop the tool before clearing swarf, and use a brush or vacuum rather than your hand. Do not blow swarf away with compressed air: the HSE warns that debris can bounce back into the eyes and that there are other serious risks.

What size hole should I drill before tapping?icon-minus-redicon-plus-red

There is no single correct drill size for a tap. The size shown on most charts gives a thread that is strong but needs quite a lot of torque to cut. A slightly larger hole gives a little less thread engagement but makes tapping easier, which is often the better choice in deep holes or tough materials.

Check the thread size and pitch, then use the maker's tap drill chart. A combined drill and tap does this in one step, so the size is built in, but the material still needs to suit the tool.

Shop Similar Categories