WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
    Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

    Rapid Ref : OD26-ULTIMATEDRILL  

    HMT OD26 Steelbor S36 & S50 Ultimate Drilling Package w/ Consumables
    OD26-ULTIMATEDRILL

    Select Option 
    Prices From £999.00 ex VAT

    Save £2,003 with this limited time offer! Valid until December 21st.

    Unlock unmatched drilling performance with the Ultimate Drilling Package.

    Built for fabricators, steel erectors and serious professionals, this bundle delivers 55mm deep broaching, fast holemaking and modular jobsite flexibility while offering a huge saving.

    • Two high-performance magnet drills: The S36 offers compact, deep-cut access work. The S50 gives powerful, 2 speed control up to 55mm cutting diameter.
    • VersaDrive-ready setup: Mag drills supplied with Rapid-Lock VersaDrive adapters for seamless use of all VersaDrive modular tooling.
    • Deep broaching and hole making capability: 110mm cutting depth on the S36. 160mm stroke on the S50 for long cutters, reamers and countersinks.
    • Premium TurboTip drill set: Stepped-tip impact bits for twice-the-speed drilling with no pilot holes and reduced operator fatigue.
    • Precision countersinking: Fully-ground, impact-rated countersinks with GoldMax TiN coating for clean, accurate deburring.
    • High-performance hole cutters: TCT cutters with 10× longer life, 55mm depth of cut and massive 70mm reach for heavy steel drilling.
    • CarbideMax 55 broach cutters: Sandvik carbide teeth for up to 10× longer life, faster cuts and quieter, chatter-free drilling.
    • Over £2000 saved: A complete drilling solution combining power, speed and durability at an unbeatable price

    HMT JS26 Promotion FAQs

    Answers to common questions about the impact-rated drilling, tapping, reaming, extraction and burring accessories found in these sets.

    How should I check and look after impact accessories?icon-minus-redicon-plus-red

    Inspect each accessory before every use. Look for cracks, chipped or rounded edges, worn drive ends and any flaking of the surface, and put damaged items aside rather than using them.

    Keep cutting tools sharp, because blunt cutters need more force and increase vibration. Wipe them clean after use, store them in their case so edges are protected, and follow the maker's instructions. Anything that has been dropped, overheated or used beyond its rating should be treated with suspicion.

    Do impact tools cause hand-arm vibration problems?icon-minus-redicon-plus-red

    They can. Hand-held power tools are a known cause of hand-arm vibration syndrome. The HSE says tingling or numbness after using a power tool may be a sign of a problem, and gives a rough guide that regular use of hammer-action tools for more than about 15 minutes a day may mean an exposure problem.

    Compare the vibration information supplied with tools, use the right tool for the job, keep tools and cutters in good condition, and report symptoms early. Your employer's risk assessment should cover this.

    How do I avoid breaking a tap?icon-minus-redicon-plus-red

    Chip build-up is a common cause of tap breakage, along with excessive torque, poor alignment and a wrongly sized hole, and it matters most in blind holes. Use a tap suited to the job, for example one designed to clear chips from the hole, and use a proper tapping lubricant.

    Keep the tap square to the work, turn it steadily and do not force it. In a blind hole, leave plenty of clearance at the bottom, because driving a tap into the bottom can easily break it. Choose the correct hole size before you start.

    What size hole should I drill before tapping?icon-minus-redicon-plus-red

    There is no single correct drill size for a tap. The size shown on most charts gives a thread that is strong but needs quite a lot of torque to cut. A slightly larger hole gives a little less thread engagement but makes tapping easier, which is often the better choice in deep holes or tough materials.

    Check the thread size and pitch, then use the maker's tap drill chart. A combined drill and tap does this in one step, so the size is built in, but the material still needs to suit the tool.

    Shop Similar Categories