WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
    Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

    Rapid Ref : STC-ETOP2-DRILL  

    HMT VersaDrive STAKIT Top Tool Case - ETOP2 Impact Drilling Kit
    STC-ETOP2-DRILL

    Click here to see what's included

    £415.82  EX VAT
    SSP Suggested Selling Price = £489.20  YOU SAVE £73.38
     Buy in 3 easy interest free payments of £138.61† with

    This product is included in the latest promotion from HMT! Valid until December 21st, save £190.20 with this limited time offer. HMT OD26 VersaDrive STAKIT ETOP2 Impact Drilling Kit

    Speed up creating or enlarging holes onsite or in the workshop and reduce kickback-related injuries with the VersaDrive ETOP2 Impact Drilling Kit.

    Supplied in a lightweight, protective STAKIT half case, the Impact Drilling Kit contains tooling to drill new holes quickly and safely from 4-30mm diameter in all types of structural steel or expand existing holes using high-power, cordless impact wrenches.

    Kit Contents

    • 4 x VersaDrive TurboTip Impact Drill Bits (6, 8, 10 & 12mm)
    • 3 x VersaDrive TurboTip Cone Cutters (20, 25 & 32mm)
    • 3 x VersaDrive TurboTip ImpactaStep Cutters (8-16, 14-22 & 18-26mm)
    • 1 x VersaDrive Rapid-Lock ½” Impact Wrench Adaptor
    • 1 x VersaDrive STAKIT Half Top Case

    HMT Step Drills FAQs

    Answers to common questions about choosing and using step drills for clean, accurate holes in thin sheet material.

    What is a step drill best used for?icon-minus-redicon-plus-red

    A step drill is a cone-shaped bit with a series of stepped diameters, and each step cuts one set hole size. It is intended for accurate, repeatable holes in thin material such as sheet steel, aluminium and plastic, for example in electrical enclosures, panels and vehicle bodywork. One bit covers several hole sizes, so you change tools less often.

    It is not meant for thick plate or deep holes, because each step only cuts a short length of material. For thicker material a twist drill is the usual choice.

    How does a step drill compare with a twist drill on sheet metal?icon-minus-redicon-plus-red

    On thin sheet, a twist drill can grab, wander and leave a rough or slightly out-of-round hole with a burr around the edge. A step drill cuts one diameter at a time, so the hole is usually round and cylindrical, and each step tends to clean up the edge left by the step before it.

    A twist drill is still the better choice for thicker material, for deep holes and for sizes that fall between the steps. Choose according to the thickness and material you drill most often.

    What speed and pressure should I use with a step drill?icon-minus-redicon-plus-red

    Speed depends on the material. Makers and tool guides generally advise a low speed for stainless steel and other hard metals, and a higher speed for mild steel, with plastics usually run faster but watched for heat. Slow down as the bit reaches the larger steps. Use light, steady pressure and let the cutting edges do the work; excessive force overheats the bit and distorts the hole.

    A variable-speed drill makes this much easier. Exact speeds differ between makers and materials, so use the figures supplied with the bit as your starting point.

    Should I use cutting fluid when drilling with a step drill?icon-minus-redicon-plus-red

    When drilling metal, cutting fluid is normally recommended, and makers specifically advise it for stainless steel. It keeps the bit cooler, reduces wear, helps flush away chips and generally gives a cleaner cut and longer bit life. Back the bit out of the hole now and then to clear swarf and let it cool.

    Aluminium can clog the cutting edges, so a wax-based lubricant is often suggested for it. Choose a fluid that is suitable for the material you are drilling.

    Shop Similar Categories