WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
    Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

    Rapid Ref : OD26-STC-ETOP2-DRILL  Mfr Ref : STC-ETOP2-DRILL

    HMT OD26 VersaDrive STAKIT ETOP2 Impact Drilling Kit
    STC-ETOP2-DRILL OD26-STC-ETOP2-DRILL

    Click here to see what's included

    £299.00  EX VAT
    SSP Suggested Selling Price = £489.20  YOU SAVE £190.20
     Buy in 3 easy interest free payments of £99.67† with

    Save £190.20 with this limited time offer! Valid until December 21st.

    Speed up creating or enlarging holes onsite or in the workshop and reduce kickback-related injuries with the VersaDrive ETOP2 Impact Drilling Kit.

    Supplied in a lightweight, protective STAKIT half case, the Impact Drilling Kit contains tooling to drill new holes quickly and safely from 4-30mm diameter in all types of structural steel or expand existing holes using high-power, cordless impact wrenches.

    Kit Contents

    • 4 x VersaDrive TurboTip Impact Drill Bits (6, 8, 10 & 12mm)
    • 3 x VersaDrive TurboTip Cone Cutters (20, 25 & 32mm)
    • 3 x VersaDrive TurboTip ImpactaStep Cutters (8-16, 14-22 & 18-26mm)
    • 1 x VersaDrive Rapid-Lock ½” Impact Wrench Adaptor
    • 1 x VersaDrive STAKIT Half Top Case

    HMT JS26 Promotion FAQs

    Answers to common questions about the impact-rated drilling, tapping, reaming, extraction and burring accessories found in these sets.

    Why do I need impact-rated accessories with an impact wrench or driver?icon-minus-redicon-plus-red

    Impact tools hit the fastener with a series of sharp blows, and it is the shock of each blow, more than the torque itself, that damages brittle accessories. Standard chrome sockets and similar items can break, and the fragments can strike the face, eyes and hands.

    Impact-rated accessories are made thicker and from tougher, less brittle steel to take that shock, and are normally marked or finished differently. Always use accessories that the maker states are suitable for impact use, and wear safety glasses.

    How should I check and look after impact accessories?icon-minus-redicon-plus-red

    Inspect each accessory before every use. Look for cracks, chipped or rounded edges, worn drive ends and any flaking of the surface, and put damaged items aside rather than using them.

    Keep cutting tools sharp, because blunt cutters need more force and increase vibration. Wipe them clean after use, store them in their case so edges are protected, and follow the maker's instructions. Anything that has been dropped, overheated or used beyond its rating should be treated with suspicion.

    Should I wear gloves when drilling, and how should I clear swarf?icon-minus-redicon-plus-red

    Be careful with gloves near rotating tools. The HSE advises that gloves should not be worn close to rotating machinery such as drills and lathes, where they can be caught. Whatever you are using, keep loose clothing, cuffs, long hair and jewellery clear of the spinning part.

    Wear eye protection that suits the task. Stop the tool before clearing swarf, and use a brush or vacuum rather than your hand. Do not blow swarf away with compressed air: the HSE warns that debris can bounce back into the eyes and that there are other serious risks.

    What size hole should I drill before tapping?icon-minus-redicon-plus-red

    There is no single correct drill size for a tap. The size shown on most charts gives a thread that is strong but needs quite a lot of torque to cut. A slightly larger hole gives a little less thread engagement but makes tapping easier, which is often the better choice in deep holes or tough materials.

    Check the thread size and pitch, then use the maker's tap drill chart. A combined drill and tap does this in one step, so the size is built in, but the material still needs to suit the tool.

    Shop Similar Categories