WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE

Magnetic Broaching Drills

Magnetic Drills for Broaching and Counterboring.

Magnetic Broaching Drills FAQs

Straight answers to the questions people ask most when choosing and using a magnetic broaching drill.

What is a magnetic broaching drill?icon-minus-redicon-plus-red

It is a drilling machine with an electromagnet or permanent magnet in the base that clamps it firmly to steel. It turns annular cutters, which cut a ring and leave a slug, as well as twist drills with a suitable chuck. Because the magnet holds the machine in place, you can drill steel structures where a bench drill cannot go.

They are widely used in fabrication, construction, steel erection and maintenance, where accurate holes are needed in beams, plate and pipe on site or in the workshop.

How do I choose the right size of magnetic drill?icon-minus-redicon-plus-red

Start with the largest hole and the thickest steel you will drill regularly, and choose a machine whose rated capacity is comfortably above that. The motor power, the cutter size it can drive and the stroke all matter.

Also think about where you will use it. A heavier machine is more powerful but harder to carry, while a compact one is easier to place in tight spots. If you are unsure, our team can help you pick.

What is the difference between an electromagnetic and a permanent magnet base?icon-minus-redicon-plus-red

An electromagnetic base only grips while the machine has power, so a power cut or a tripped supply can release the grip. A switchable permanent magnet base holds without electricity once it is switched on, but it still needs a mechanical release and care when removing it from the work.

Whichever type you have, grip depends on clean, thick, flat steel, and makers advise fitting a safety strap or chain, especially for vertical or overhead work. Never rely on the magnet alone. Check the manual for your own machine to see how its base works and releases.

Does the thickness of the steel affect the grip?icon-minus-redicon-plus-red

Yes. The magnet needs enough steel under it to carry the magnetic flux, so thin plate, rusty, painted or uneven surfaces reduce the holding force. Lower magnetic grade steels and small contact areas also weaken the grip.

On thin or poor surfaces, use a secure strap, chain or clamp as well, or choose another holding method. Never rely on the magnet alone for overhead or vertical work.

Can I use a magnetic drill on stainless steel or aluminium?icon-minus-redicon-plus-red

Austenitic stainless steel and aluminium are generally not magnetic, so the magnet will not hold on them. You can clamp the work to a steel plate or beam and drill through that, or use a vacuum base or a mechanical clamp that the maker approves.

The drilling itself works well with the right cutter, speed and fluid, but the holding method must be safe.

What is the difference between a variable speed machine and a fixed speed one?icon-minus-redicon-plus-red

A fixed-speed machine runs at one speed or a couple of gear settings, and suits repeated work in a given material and size. A variable speed machine lets you set the speed to suit the cutter diameter and material, which is useful if you move between jobs.

Some machines also offer reverse for tapping and adjustable torque. Think about the range of work you do before choosing.