WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
    Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

    Rapid Ref : 505040-0320  

    HMT VersaDrive Impact Electrical Sizing Step Drill, 4-32mm
    505040-0320

    £93.88  EX VAT
    SSP Suggested Selling Price = £110.45  YOU SAVE £16.57
     Buy in 3 easy interest free payments of £31.29† with

    The first step drill optimised for use with impact wrenches & impact drivers allowing the user to create holes in seconds. It features a spiral flute design, a self-starting drill tip for fast, smooth drilling with a rotary drill or impact wrench, and a market-leading 5mm thick drilling capacity. VersaDrive Step Drills have a patented non-slip Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills or used with a VersaDrive Rapid Lock adaptor for use in a wide range of power tools such as Magnetic Drills.

    Product Details

    Features

    • Market Leading 5mm thick drilling capacity.
    • Fast, smooth drilling with minimal kickback.
    • Specially hardened for impact wrench use.
    • Precision ground flutes with easy chip clearance.
    • 135° split point angle for easy starting & accuracy.
    • GoldMax low-friction titanium coating to stop burnout.
    • High strength, non-slip shank design.
    • For the fastest performance use on impact wrenches & impact drivers.
    • Excellent life and performance when used with rotary pistol drills or drill presses.
    • Suitable for stainless and harder materials if used at low RPM.
    • Use appropriate lubrication and correct RPM to achieve long tool life.

    HMT Step Drills FAQs

    Answers to common questions about choosing and using step drills for clean, accurate holes in thin sheet material.

    What is a step drill best used for?icon-minus-redicon-plus-red

    A step drill is a cone-shaped bit with a series of stepped diameters, and each step cuts one set hole size. It is intended for accurate, repeatable holes in thin material such as sheet steel, aluminium and plastic, for example in electrical enclosures, panels and vehicle bodywork. One bit covers several hole sizes, so you change tools less often.

    It is not meant for thick plate or deep holes, because each step only cuts a short length of material. For thicker material a twist drill is the usual choice.

    How thick a material can a step drill cut?icon-minus-redicon-plus-red

    Step drills are designed for thin material, and makers state a maximum thickness for each bit or set. The figure varies widely: general-purpose bits are often rated for only a few millimetres of sheet, and some cobalt bits are rated for sheet steel gauges around 2 to 3.5 mm, with stainless steel often rated lower.

    The limit depends on the bit, the material and the power of the drill. Thicker plate is better drilled with a twist drill, often starting with a small pilot hole. Always check the limit stated by the maker for your particular bit.

    What if I need a hole size between two steps?icon-minus-redicon-plus-red

    A step drill cuts fixed diameters, so it cannot make a size that falls between two steps. The usual options are to use the next step up if the larger hole is acceptable, to drill with a twist drill of the exact size, or to use a tapered sheet-metal cone drill, which enlarges a hole steplessly.

    Check the sizes marked on the bit before you buy, as step drills are made in metric and in inch sizes, and make sure the steps match the holes you need, for example for glands, conduit or fixings.

    What speed and pressure should I use with a step drill?icon-minus-redicon-plus-red

    Speed depends on the material. Makers and tool guides generally advise a low speed for stainless steel and other hard metals, and a higher speed for mild steel, with plastics usually run faster but watched for heat. Slow down as the bit reaches the larger steps. Use light, steady pressure and let the cutting edges do the work; excessive force overheats the bit and distorts the hole.

    A variable-speed drill makes this much easier. Exact speeds differ between makers and materials, so use the figures supplied with the bit as your starting point.

    Shop Similar Categories