WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
    Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

    Rapid Ref : 7901860X1-K1  

    BRB 4 Boiler Pipe Preparation Machine, Kit 1, with "NC" clamp, Pipe ID clamping Range: 19.1 - 38mm
    7901860X1-K1

    Select Option 
    Prices From £4545.00 ex VAT

    Lightweight and robust Boiler Prep Machine. Counterboring and axial turning of pipes made from high-alloy steel (stainless steel), low-alloy and carbon steel with the unique tool system QTC®. Designed for pipe end preparations and boiler pipe applications.

    The BRB machines are available in the following drive versions:

    Electric:
    230 V, 50/60 Hz EU or 120 V, 50/60 Hz EU/US.
    Electric drive with single-phase AC motor. Protection class II (double insulated). Built-in electronic variable cutting speed.

    Pneumatic:
    Pneumatic power drive. The manufacturer’s warranty can only be given when using the original Orbitalum mobile air unit, Code 790 093 060 (click here to view).

    Pneumatic/Auto:
    Pneumatic multi-disc or with an additional pneumatic clamping system.
    When installing or repairing boiler pipes, time is of the essence - the new pneumatic clamping system greatly reduces the time to clamp and release the machine, improving efficiency. The machine centres itself on the inside diameter of the pipe and then clamps automatically by using the toggle switch, likewise, the toggle switch releases the clamping after the machining operation. This is why the BRB with automatic pneumatic clamping is ideal for continuous production e.g. boiler and heat exchanger applications.

    Product Details

    Brochures & Manuals

    BROCHURES & MANUALS
       View Brochure

    Related Items

    BRB 2 & BRB 4 "NC" Clamp FAQs

    Practical answers on choosing, fitting and using a portable tube end preparation machine with an internal wedge clamp.

    How do I know when a cutter insert needs changing?icon-minus-redicon-plus-red

    Trade guidance on cutting tools lists the usual warning signs: a poorer surface finish, rising cutting force, vibration or squealing, parts drifting out of size, visible wear or chipping, changed chip shape and tool life that is shorter than normal. The same guidance warns that waiting for a tool to break leads to scrap and damage to the holder.

    Changing too late risks a spoiled tube end or a broken cutter, while changing too early wastes cutting edge that is still good. Turn or replace the insert as the manual describes, clean the seat first, and fit it with the screw tightened as the maker specifies.

    What does an internal-clamp tube end preparation machine do?icon-minus-redicon-plus-red

    It grips the inside of the tube with an expanding clamp on a central mandrel, then drives a cutter head round the tube end to face it square and cut the bevel in one set-up. Trade and patent descriptions of this type of tool explain that the clamps spread outwards as a draw rod pulls them along a taper, which centres the machine in a round bore.

    Because the machine is held by the tube itself, it can be used on tubes that are already installed or cannot be moved to a lathe, such as tube banks and boiler work. The finished end is concentric with the bore.

    Should I wear gloves when using the machine?icon-minus-redicon-plus-red

    No, not around a rotating cutter. The HSE says many serious workshop accidents could be avoided if gloves were not worn close to rotating machinery. Its guidance also says to avoid loose or baggy clothing and jewellery, including rings, and to tie back long hair or wear a suitable hair net.

    Keep the machine guarded, switch it off and let it stop before handling the cutter or swarf, and use suitable cut-resistant gloves only for handling sharp parts when everything has stopped. Follow the manual and your risk assessment.

    How often should the machine be checked and serviced?icon-minus-redicon-plus-red

    The HSE says inspection frequency depends on the type of work equipment, how it is used and the conditions it is exposed to, and should be set through risk assessment taking full account of the manufacturer's recommendations. It also says inspection does not replace servicing, which keeps the equipment in efficient working order and good repair.

    In practice that means a quick look before each use (guards, cutter, clamp, air hose or cable) and a fuller check at the intervals in the manual. Take any machine with a damaged guard, cable or hose out of use until it is repaired.

    Shop Similar Categories