WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
    Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

    Rapid Ref : GP-350-M  

    Gullco Programmable Rotary Weld Positioner w/ 60mm Centre Hole
    GP-350-M

    Select Option 
    Prices From £7006.00 ex VAT
     Buy in 3 easy interest free payments of £1658.33† with

    The GP-350-M Welding Positioner is a positive drive rotary turn table complete with a mounting flange, drive and tilt mechanism and Microprocessor based pulse width modulation motor control. The welding positioner is driven by a low-voltage permanent magnet motor and gearhead power unit assembly. The microprocessor motor control enables the operator interface of start, stop, clockwise rotation, neutral, counterclockwise rotation and infinitely variable control of the speed, within the range of the positioner model.

    This positioner model is designed with a 2.5” (63mm) through hole so the workpiece can be passed through the unit (max material of 60mm OD) making production on long pieces easier and faster.

    The weld positioner's rotation speed is electronically controlled using an optical tachometer located on the back of the gear motor. Speeds within the range of the model are infinitely variable in both clockwise and counter-clockwise directions through a rotary speed adjustment potentiometer located on the remote control. Table tilt is manually set at any desired angle, from 0° through 90°, quickly and easily. Safety while using the positioner is greatly enhanced with Gullco’s low voltage (24V) control and power supply system.

    This model includes a programmable remote control with LED readout and provides the following features:

    • Infinitely variable rotation speed within the model’s speed range
    • Forward / neutral / reverse switch
    • Run/stop switch
    • Programmable microprocessor providing adjustable positioning timing cycles, amount of weld rotation, weld on / weld off through 360° and a signal to activate a pneumatically operated weld gun holder and wire feed arc activation

    Product Details

    Specification

    Rotational Speed: 0.27 - 4.63 RPM
    Vertical Table Loading at 3" C of G: 68Kg
    Horizontal Table Loading: 132Kg
    Table Rotation: 0° through 90°

    Brochures & Manuals

    BROCHURES & MANUALS
       View Brochure

    Weld Positioning Equipment FAQs

    Straight answers to the questions people ask most when choosing and using a welding positioner.

    How do I choose the right capacity for a positioner?icon-minus-redicon-plus-red

    Capacity is the weight of work a positioner is rated to carry, but the rating depends on how the load sits on the table. A load centred on the axis of rotation is the easy case. If the centre of gravity is offset from the centre, or the table is tilted, the positioner can safely carry less.

    The maker normally gives ratings for different offsets and angles, so check these against your heaviest and most awkward workpiece, and allow a good margin. Remember to include any fixtures, chucks and clamps in the weight.

    What is the difference between a rotary positioner and a tilt-and-rotate positioner?icon-minus-redicon-plus-red

    A rotary positioner turns the work about one axis. If the table is fixed flat, it suits round parts welded around the circumference, such as pipe, tube and discs. A tilt-and-rotate positioner can also tilt the table, so you can bring awkward joints into a flat or near-flat position and reach more of a complex fabrication.

    Some rotary positioners can be tilted by hand or by motor. Choose the simpler type if your work is mainly round parts, and a tilting type if you weld varied shapes.

    Why does rotation speed matter and how is it controlled?icon-minus-redicon-plus-red

    For circumferential welds, the rotation speed sets the travel speed of the weld, which affects penetration, bead shape and heat input. The speed you need depends on the process, the diameter of the work, the material and the current.

    Positioners normally have variable speed control, so you can set a steady speed and repeat it. Many have forward and reverse, a footswitch or remote control, and some programmable models can set the speed, direction and sequence for you. Remember that a given rotation speed gives a faster surface speed on a larger diameter.

    How do I hold the work on a positioner?icon-minus-redicon-plus-red

    Work can be held with a chuck, clamps, bolted fixtures, or purpose-made tooling. A self-centring chuck suits round parts such as pipes and bars, and a quick-action chuck makes loading and unloading faster. T-slotted tables allow clamps and fixtures to be bolted down.

    Whatever you use, the work must be held securely and as close to the centre as possible, because the turning load can throw the part off if it is loosely held. Check the grip each time, and make sure fixtures are heavy enough for the work and heat.

    Shop Similar Categories