WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
    Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

    Rapid Ref : SETFM-WLD-05  

    HMT VersaDrive STAKIT Small 5 Space InsertFoam for CarbideMax 40 & 55 Cutters
    SETFM-WLD-05

    £16.75  EX VAT
    SSP Suggested Selling Price = £19.70  YOU SAVE £2.95

    This will hold five CarbideMax tools. Compatible with tools up to 100mm long & 26mm in diameter. Stores CarbideMax 40 & CarbideMax 55.

    The InsertFoam system is an innovative new addition to the STAKIT Storage system. Modular and customisable tool case storage to organise your most important cutting tool sets easily and efficiently.

    • Protect essential tooling
    • Store & organise tooling so it's accessible as & when needed
    • Compatible with STAKIT Top cases
    • Integrate tooling into a STAKIT system for ultimate portability
    • Flexible design accommodates a wide variety of tooling designs
    • Easily create your own custom kits

    Related Items

    HMT CarbideMAX TCT 40 Cutters FAQs

    Straight answers to the questions people ask most when choosing and using 40 depth tungsten carbide tipped broach cutters.

    What is a general-purpose TCT broach cutter used for?icon-minus-redicon-plus-red

    A broach (annular) cutter removes a ring of metal and leaves a solid slug, so it cuts faster and needs less power than a twist drill of the same diameter. Each cutter has a stated maximum depth of cut, normally in millimetres.

    Medium-depth cutters are a general-purpose choice for structural steel sections, plate and fabrication work where holes pass through moderate thicknesses. Tungsten carbide tipped teeth keep their edge in tough materials such as stainless and high tensile steel, provided the machine is rigid.

    Which pilot pin fits my cutter?icon-minus-redicon-plus-red

    Pilot pins are matched to the cutter depth series and to a diameter range. Check the diameter of your cutter against the range stated on the pin, and confirm the pin is for the same depth series.

    Small diameter ranges and larger ranges often use different pins, so a pin that fits one cutter may not suit another. Packs of several pins are handy because pins are small, wear, and are easily lost or bent. Check the markings if you are unsure.

    Is the cutter depth enough for my material?icon-minus-redicon-plus-red

    Add up the total thickness the cutter has to pass through. For a plate, that is the plate thickness. For a box or hollow section, add both walls. For a flange with a packer or stacked plates, add everything.

    The stated depth of cut should be comfortably more than the total. If the job is close to the limit, choose a deeper cutter, since a cutter driven to the very bottom of its depth can jam or fail to eject the slug. Check the depth marked on the cutter and in the maker's literature.

    TCT or HSS: which is better for my work?icon-minus-redicon-plus-red

    TCT cutters last longer in hard, abrasive or work-hardening materials and can cut at higher speeds on a rigid machine. They are the usual choice for stainless, thick structural steel and production drilling.

    HSS cutters are tougher against vibration and are often kinder in less rigid set-ups. For occasional mild steel work they can be perfectly adequate. Choose by material, machine rigidity and how many holes you drill.

    Shop Similar Categories