WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
    Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

    Rapid Ref : SETFM-VSD-07  

    HMT VersaDrive STAKIT Small 7 Space InsertFoam for HoleCutters, ImpactaSteps & Countersinks
    SETFM-VSD-07

    £16.75  EX VAT
    SSP Suggested Selling Price = £19.70  YOU SAVE £2.95

    This will hold seven VersaDrive tools. Compatible with HoleCutters, ImpactaSteps and Countersinks.

    The InsertFoam system is an innovative new addition to the STAKIT Storage system. Modular and customisable tool case storage to organise your most important cutting tool sets easily and efficiently.

    • Protect essential tooling
    • Store & organise tooling so it's accessible as & when needed
    • Compatible with STAKIT Top cases
    • Integrate tooling into a STAKIT system for ultimate portability
    • Flexible design accommodates a wide variety of tooling designs
    • Easily create your own custom kits

    Related Items

    HMT CarbideMAX TCT 110 Cutters FAQs

    Straight answers to the questions people ask most when choosing and using deep carbide-tipped annular cutters.

    What machine do I need to run a deep carbide cutter?icon-minus-redicon-plus-red

    Use a rigid magnetic drill, or similar machine designed for annular cutters, with a firm magnet and a shank type that matches the cutter. Annular cutters should not be run in a handheld drill. Deep cutters are long and put more load on the machine, so check that its rated capacity covers the cutter diameter and depth, and that it has enough stroke.

    A worn or underpowered machine may vibrate, which chips carbide teeth. Always check the data plate and manual for your own machine, and use the safety strap or chain.

    How do I choose the right pilot pin?icon-minus-redicon-plus-red

    Pilot pins come in versions for different diameter bands, and some are one-piece and some two-piece for larger sizes. They must match the series and the diameter of the cutter.

    The pin has to be long enough to reach through the deep cutter and eject the slug. Use the pin specified for the cutter, and replace worn pins promptly.

    What is a coated carbide cutter?icon-minus-redicon-plus-red

    Some cutters have a surface coating that reduces friction and heat, which can lengthen life and help in tough conditions. The coating wears away with use.

    A coated cutter still needs proper fluid, steady feed and a firm setup.

    How do I get a good result in thick steel?icon-minus-redicon-plus-red

    Make sure the magnet is gripping on clean, flat steel, secure the machine with a strap, and apply plenty of cutting fluid. Start the cut gently, then feed steadily with even pressure and avoid stopping with the cutter in the cut.

    For very deep holes, ease the cutter back now and then to clear swarf if the maker advises.

    Shop Similar Categories