WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
    Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

    Rapid Ref : 40041  

    Jackson AIRMAX+ PAPR System with TRANSLIGHT FLIP 455 Welding Helmet TH3.
    40041

    Click here to see what's included

    £899.28  EX VAT
    SSP Suggested Selling Price = £905.45  YOU SAVE £6.18
     Buy in 3 easy interest free payments of £299.76† with

    Jackson presents the Airmax+ PAPR system with the Translight Flip 455 welding helmet, built with eight different blower speed settings and an operation time of up to 10 hours with a new filter P R SL and airflow 180 l/min. The Translight Flip 455 features newly designed grip strip technology to ease the process of lowering and raising the outer welding shell, allowing the clear extra-large polycarbonate visor for grinding applications with 205 x 155mm viewing area. The Airmax+ PAPR system boasts multiple blower speed settings, adjustable airflow from 180 lpm to 260 lpm.

    This unit comes supplied with a battery charger, battery, waist belt, hose, HEPA filter, pre-filter and PAPR welding helmet with auto darkening lens. Please note that the odour removing filter is sold separately.

    Product Details

    Features

    • Shade range 4/5-8/9-13 with sensitivity, delay and grinding modes.
    • Integrated air duct with hose connector.
    • Breathing hose with flame retardant cover with additional protection from sparks and spatter.
    • Control of air supply directed through to upper or lower parts of the helmet.
    • Accessible and easy to use, particularly with oversized welding gloves.
    • Vibration and audible filter alarms built in the PAPR system.

     

    Brochures & Manuals

    BROCHURES & MANUALS
       View Brochure

    Related Items

    Jackson Air Fed Helmets FAQs

    Powered air-fed welding and grinding helmet systems: what they do, how to check them and how to look after the blower, filters, battery and tube.

    Can a powered air helmet replace fume extraction?icon-minus-redicon-plus-red

    Not on its own. General ventilation does not give the control that is expected for welding fume, and indoor welding normally needs suitable engineering controls, typically local exhaust ventilation. Respiratory protective equipment is then used for whatever fume the extraction does not capture. Outdoors, where extraction is often impractical, suitable respiratory protection is expected.

    A powered helmet is therefore best seen as the last layer of protection, used within a wider respiratory protection programme that covers selection, training, inspection, maintenance, cleaning and storage. Your risk assessment decides what combination you need.

    Do I need a face fit test for a powered helmet, and what about a beard?icon-minus-redicon-plus-red

    Powered or constant-flow equipment with a loose-fitting hood or helmet does not need a face fit test, because it does not rely on a seal against the skin. Tight-fitting masks are different and do need testing.

    That does not mean fit is unimportant. The headtop still has to be the right size and adjusted properly so that the airflow stays inside the helmet and the visor sits correctly. Loose-fitting helmets can often be worn with stubble or a beard, but follow the maker's instructions and your own risk assessment, because facial hair can interfere with other items such as a tight-fitting mask worn underneath.

    How do I check the airflow before I start work?icon-minus-redicon-plus-red

    An airflow check is needed before each use, with the filters fitted and the battery fully charged. The method differs between systems: some use a flow indicator at the end of the breathing tube, others a check at the blower outlet with the tube removed, and the minimum flow figure is set by the maker.

    If the reading is below the minimum, do not weld. Common causes include a loaded or blocked filter, a battery that is not fully charged, or a damaged or blocked tube or connection. Fix the cause, and if the unit still fails the check, take it out of use and have it serviced. Always follow the exact procedure and minimum figure in your manual.

    How often should the system be inspected and tested?icon-minus-redicon-plus-red

    Respiratory protective equipment should be thoroughly inspected before each use, and reusable equipment should have regular examination, maintenance and testing, with records kept. The intervals and how long to keep the records depend on the equipment and your risk assessment, so confirm them with the maker or a competent person.

    In practice, look over the headtop, visor, seals, breathing tube, belt, blower, filter housing and battery contacts. Replace anything cracked, torn or loose rather than patching it, and make sure each wearer knows how to do the check.

    Shop Similar Categories