WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
    Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

    Rapid Ref : 790041030  

    Special Gear Oil for all GF and RA Machines, 250ml Bottle
    790041030

    £30.50  EX VAT
     Buy in 3 easy interest free payments of £10.17† with

    Orbitalum Sawblade and Machine Oil FAQs

    Straight answers to the questions people ask most when choosing and using saw blade lubricant and gear oil for orbital tube cutting machines.

    How often should I apply saw blade lubricant?icon-minus-redicon-plus-red

    Follow your machine's manual, because the interval depends on the machine and the tube. One maker's instructions for an orbital pipe saw say to lubricate at least every third cut on pipe up to 2 inches in diameter, and before every cut on larger pipe and on chrome-bearing or other high-quality steels. They also say to lubricate again during the work if needed.

    On stainless or thick-walled tube, lubricating before each cut is a sensible habit. Always remove lubricant residue from the machine afterwards.

    Can I use ordinary oil or a spray instead of saw blade lubricant?icon-minus-redicon-plus-red

    It is best not to. The operating instructions for one orbital pipe saw say to use only saw blade lubricant, and specifically not oils. A thin oil may not stay at the cutting edge and can leave a film that is harder to remove from the tube and the machine.

    Some machines use a separate cutting lubrication system instead of a paste, so check which your model is designed for. The wrong product can leave residues that matter when the tube is later welded.

    Why do some buyers choose a chlorine-free lubricant for stainless steel?icon-minus-redicon-plus-red

    Chlorides are the most common environmental cause of stress corrosion cracking in stainless steels, and the usual 304 and 316 types are among the most susceptible. Cutting additives containing chlorine can also form hydrogen chloride when hot, which can cause corrosion. For these reasons many fabricators of stainless tube prefer products described as chlorine-free.

    It is not a guarantee against every corrosion risk. Check the product data sheet against your job specification, and still clean the tube after cutting.

    Is it safe to get saw blade lubricant on my hands?icon-minus-redicon-plus-red

    Treat it with care. HSE guidance on metalworking fluids says that neat oils, additives and the fine metal particles picked up in use can cause dermatitis, especially on the hands, arms, face and torso, so skin contact should be prevented where possible and limited where it cannot be.

    Read the safety data sheet, wear the gloves it recommends, keep contaminated clothing away from your skin, wash after use and report any skin irritation. Your risk assessment should cover how it is handled.

    Shop Similar Categories