WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
    Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

    Rapid Ref : 108090  

    HMT CarbideMax ULTRA Coated TCT Broach Cutter - 110mm Depth
    108090

    Select Option 
    Prices From £162.85 ex VAT

    CarbideMax Ultra cutters are specifically designed for the toughest broaching jobs on the planet.

    Successful results machining these materials requires the right combination of equipment, including high torque/slow speed, geared Magnet Drill, like the HMT MAX100 Magnet Drill and plenty of BioCut Blue lubricant. Patience and experience are essential to get the best results with these materials, including allowing the cutter to cool during the cut to avoid overheating and damaging the cutting tips.

    HMT CarbideMax TCT Broach cutters are tipped with individually brazed cutting teeth of the highest quality carbide. They are designed with an elaborate cutting geometry, which results in faster, quieter, easier drilling and chatter-free performance.

    The CarbideMax 110 Series will broach up to 110mm thickness of metal.

    HMT CarbideMAX TCT 110 Cutters FAQs

    Straight answers to the questions people ask most when choosing and using deep carbide-tipped annular cutters.

    What is a deep carbide-tipped annular cutter?icon-minus-redicon-plus-red

    It is a hollow cutter with tungsten carbide teeth that removes a ring of metal and leaves a solid slug. Deep versions are made for thick sections and stacked plate that a shorter cutter cannot cut through in one pass.

    The carbide teeth stay sharp far longer than high speed steel, but they are more brittle, so they need a rigid, well-gripped machine. Each cutter has a maximum depth of cut. Check this on the cutter and in the maker's literature, and make sure it is greater than the thickness of your material.

    When do I need a deep cutter rather than a standard one?icon-minus-redicon-plus-red

    When the steel you are cutting through is thicker than a standard depth cutter can handle, for example heavy sections, stacked plate or thick flanges.

    If the material is thin, a shorter cutter is stiffer and gives a better result. Choose the shortest depth that cuts through your material.

    How do I choose the right pilot pin?icon-minus-redicon-plus-red

    Pilot pins come in versions for different diameter bands, and some are one-piece and some two-piece for larger sizes. They must match the series and the diameter of the cutter.

    The pin has to be long enough to reach through the deep cutter and eject the slug. Use the pin specified for the cutter, and replace worn pins promptly.

    How do I get a good result in thick steel?icon-minus-redicon-plus-red

    Make sure the magnet is gripping on clean, flat steel, secure the machine with a strap, and apply plenty of cutting fluid. Start the cut gently, then feed steadily with even pressure and avoid stopping with the cutter in the cut.

    For very deep holes, ease the cutter back now and then to clear swarf if the maker advises.

    Shop Similar Categories