WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
    Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

    Rapid Ref : 4022-SET2  

    HMT AliCut Tungsten Carbide TCT Burr 4 Piece 6mm Set
    4022-SET2

    Click here to see what's included

    £135.87  EX VAT
    SSP Suggested Selling Price = £159.85  YOU SAVE £23.98
     Buy in 3 easy interest free payments of £45.29† with
    AliCut TCT Burrs are made to the highest specifications, giving metalworkers a precision cut, high control, and long life. Designed for use on Aluminium and other non-ferrous metals. All burrs are 100% braze tested for strength and safety.

    HMT TCT Burrs FAQs

    Straight answers on choosing, fitting and using tungsten carbide rotary burrs for deburring, shaping and weld dressing.

    How do I choose the right burr shape?icon-minus-redicon-plus-red

    Pick the shape that fits the surface you are working on. A cylinder, with a flat or rounded end, suits flat surfaces, edge deburring and weld removal. A ball suits concave cuts, hollowing and rounding edges. A tree (pointed or rounded) is used for V-grooves, fillets and curves, and a flame reaches tight areas while still working larger surfaces. A cone is handy for chamfering and deburring in narrow spaces.

    If you are unsure, a mixed set of common shapes is a sensible starting point. Shape letter codes differ between makers, so check the description rather than relying on the code alone.

    What speed should I run a carbide burr at?icon-minus-redicon-plus-red

    Never exceed the maximum speed marked on the burr or the grinder. The burr's rated maximum should be at least as high as the speed of the tool you are using, and a die grinder should be checked against its own marked speed.

    Within that limit, harder metals such as stainless steel usually need a lower speed than soft metals such as aluminium. Burrs with long shanks need extra care and a reduced speed. If you are unsure of the actual speed of an air or electric grinder, check the maker's data and have it verified before fitting the burr.

    What protective equipment do I need when using a burr?icon-minus-redicon-plus-red

    Wear eye protection every time, because chips and sparks fly off at high speed. Burr makers also recommend hearing protection, a dust mask, and protective gloves, and say the tool should be held with both hands. Keep guards in place where fitted and secure the workpiece so that it cannot move.

    A carbide burr screaming against metal is loud, so do not skip ear protection on longer jobs. Your risk assessment and the manufacturer's instructions decide exactly what you need for your task.

    How do I fit a burr in the grinder correctly?icon-minus-redicon-plus-red

    Make sure the shank diameter matches the collet. Do not mix metric shanks with inch collets, as a burr that looks close can work loose and be thrown out even when tightened firmly. Push the shank well into the collet so that only the head and as little shank as possible is exposed, and keep at least the minimum grip the grinder maker specifies.

    Tighten the collet properly, then run a new burr briefly in a safe position, away from people, before starting work. Stop at once if there is excessive vibration.

    Shop Similar Categories