WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
  • KBM-18U-100  Gullco KBM18-U Inverted Portable Plate Edge Bevelling Machine 415v (Undercarriage Sold Separately)
  • KBM-18U-100  Gullco KBM18-U Inverted Portable Plate Edge Bevelling Machine 415v (Undercarriage Sold Separately)
Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

Rapid Ref : KBM-18U-100  

Gullco KBM18-U Inverted Portable Plate Edge Bevelling Machine 415v (Undercarriage Sold Separately)
KBM-18U-100

£8439.00  EX VAT
 Buy in 3 easy interest free payments of £2813.00† with
Please note, this product does not qualify for our standard shipping rates outside of the UK Mainland. Please contact us for shipping rates for this product.

For Bevelling the underside of plate

Adjustable bevelling head to produce bevel angles 22-1/2° through 55°. Bevelling speed 120 IPM (305cm/min). Bevelling produced by a rotary shear type cutter ideal for bevelling mild steel, stainless steel and aluminium plates from ¼" to 1-1/2"* (6.0 - 38.1mm*) thick with a maximum bevel width. 0.70" (18mm) at a standard bevel angle of 30°.

Machine supplied with a KBM-18-X1C medium tooth cutter, angle bevel pins for 22-1/2°, 30°, 37-1/2°, 45° and 55° degree bevels. All bevel angles are obtained by tilting the adjustable cutter head assembly on its base frame. Machine complete with a 2 H.P. 3-phase motor. Voltages available: 230V, 460V and 575V, 3 phase 60hz, and 380V, 415V, 3 phase, 50hz. (Specify voltage at the time of placing order). Weight: 285 lbs (129.2Kg) - including undercarriage assembly. *Thinner material can be bevelled - consult the factory for details.

Product Details


Brochures & Manuals

Related Items

Gullco Bevelling Machines FAQs

Answers to common questions about portable, electrically powered plate edge bevelling machines used to prepare plate edges for welding.

What does a portable plate edge bevelling machine do, and how does it work?icon-minus-redicon-plus-red

It is a mains-powered machine that cuts a straight, machined bevel on the edge of steel, stainless or aluminium plate so the edge is ready for a weld joint. Many work as a rotary shear: a toothed, hardened cutter removes the metal and also pulls the plate through the machine, or pulls the machine along a fixed plate.

Because the bevel is machined, it avoids the heat of thermal cutting. Most machines of this type are meant for straight edges and, with the right guide settings, large curved edges. The adjustable head sets the bevel angle and depth. Always check your own machine's manual for the materials, thickness range and bevel angles it is rated for.

Why do I have to bevel in several passes instead of one?icon-minus-redicon-plus-red

A bevelling machine can only remove so much metal at once. Overloading the cutter and drive causes poor feeding, a rough finish and broken cutters. Makers therefore rate a maximum bevel width and advise staying below it in a single pass, and going lighter still on tougher materials.

One maker, for example, advises no more than about 70 per cent of the rated capacity in one pass, and no more than about 50 per cent for high-tensile steel and stainless steel. The exact figures depend on your machine, so check its manual. For a large bevel, set a conservative first cut, then re-adjust the slide or depth setting for the second pass. Doing a test run on an off-cut first is sensible.

Can I bevel stainless steel, high-tensile plate or flame-cut edges?icon-minus-redicon-plus-red

Usually yes, but with care and within the limits in your manual. As material strength rises, the bevel a machine can take off in a pass falls, so use shallower cuts and more passes. Keep the cutter sharp, because a dull cutter causes feeding problems and a rough bevel.

Flame-cut edges can carry slag and may be work-hardened, and hardening can be severe on high-tensile steel. Remove all slag before bevelling and check that the material can be machined before you try it. If you are unsure whether a particular grade of plate is suitable, ask the maker or our team before starting.

Can the machine bevel curved plate edges, such as discs?icon-minus-redicon-plus-red

Many plate bevelling machines are designed for straight edges and also for circular or curved plate, provided the guide rollers are set correctly. The guide rollers sit slightly proud of the guide bracket for a straight edge. For a concave edge (the inside of a disc) they need to be set further back, and for a convex edge (the outside of a disc) further forward.

Curved and awkward pieces must be supported properly so the plate stays square to the cutter. Twisting or unsupported weight puts side loads on the cutter and is a common cause of breakage. Check your manual for the guide roller adjustment and any minimum curve radius.

Shop Similar Categories