The website is working fine. Please feel free to place orders. WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
    Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

    Rapid Ref : 3M-532015  Mfr Ref : 532015

    3M Speedglas 9100 Side Window Protection Plates (Pack of 2)
    532015 3M-532015

    £14.46  EX VAT
    SSP Suggested Selling Price = £20.17  YOU SAVE £5.71

    9100 Series Parts FAQs

    Spare plates, filters, headbands and comfort parts for an auto-darkening welding helmet, and how to match them to your helmet.

    How do I know when a protection plate needs replacing?icon-minus-redicon-plus-red

    Replace a plate that is scratched, cracked, pitted or heavily covered in spatter. Makers' instructions say a damaged outer cover should be changed rather than used, because it can interfere with the auto-darkening sensors and spoil your view of the work.

    Check both plates before each shift: look through the helmet at a bright, plain background, and any marks, haze or dark spots will show up. Plates are a wear item, so how often you change them depends on the process, how much spatter you create and how you store the helmet.

    Can I clean a protection plate or filter with solvent?icon-minus-redicon-plus-red

    No. Makers' instructions say not to clean the front lens cover or the helmet with solvents or abrasive cleaning products, because they can scratch or cloud the surface. Use only the cleaning method in your helmet's manual, which is normally a soft, clean, lint-free cloth.

    Do not immerse the filter in water either. If a plate cannot be cleaned to a clear finish, replace it rather than trying harder to clean it.

    What can happen if I keep using a damaged plate or a filter that does not darken?icon-minus-redicon-plus-red

    Welding radiation can injure the eyes. The HSE describes arc eye as an acute injury to the front of the eye (the cornea) caused by welding radiation, usually painful and red a few hours after the exposure. It also links welding ultraviolet radiation to a rare eye cancer, which is why it stresses protecting the eyes when welding.

    A filter that fails to darken, or a cracked plate or frame that lets light in, removes that protection. Take the helmet out of use until the faulty part has been replaced.

    What do the markings on a filter mean, and why do older filters show different markings?icon-minus-redicon-plus-red

    Filters usually carry a light-state shade, the dark shade or range, and an optical class. Older filters and helmet frames are marked to standards that have since been withdrawn and replaced by a newer international standard series, so newer products may carry different markings.

    Look at the markings on your own filter and helmet and quote them to us or the maker; do not guess the grade from how a filter looks.

    Shop Similar Categories