WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
    Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

    Rapid Ref : PR1  

    Armorgard Mobile Collapsible Pipe Rack, Certified 1 Tonne Capacity
    PR1

    £1046.00  EX VAT
    SSP Suggested Selling Price = £1307.27  YOU SAVE £261.27
     Buy in 3 easy interest free payments of £348.67† with
    Please note, this product does not qualify for our standard shipping rates outside of the UK Mainland. Please contact us for shipping rates for this product.

    Robust mobile pipe storage rack measuring 1000 x 1500 x 1560 mm, with a 1-tonne capacity. Designed to keep pipes organised, accessible, and secure, it features heavy-duty construction, a powder-coated finish, and four swivel castors. The rack is fully collapsible and stackable when not in use, and is supplied with an official weight testing certificate.

    Brochures & Manuals

    BROCHURES & MANUALS
       View Brochure

    Pipe Storage FAQs

    Practical answers on choosing, loading and looking after pipe racks so your pipe stays safe, straight and clean.

    How do I stop pipes rolling off a rack?icon-minus-redicon-plus-red

    Round pipe rolls, so it needs something to hold it in place. A good rack has upturned ends, side stops or arms that angle the pipe into a cradle. Where a rack does not do this on its own, use wedges or chocks that are secured so they cannot be knocked out.

    When you take a pipe out, think about what the others will do. Take pipe from the top layer or the end of the stack first, keep clear of the open side, and re-fit any stop that you removed. Do not stack pipe higher than the rack is designed for.

    Stacking too many layers can also squash thin-walled pipe out of round, so a rack that spreads the load is better than a pile.

    Can I store stainless steel pipe on the same rack as carbon steel pipe?icon-minus-redicon-plus-red

    It is best not to. Stainless steel stored against carbon steel can pick up iron particles and rust marks, which can spoil its corrosion resistance and its appearance. Where possible, keep stainless pipe on its own rack and away from areas where carbon steel is ground or cut, because the dust spreads.

    If you must share a rack, wrap the stainless pipe thoroughly and keep it clear of bare steel arms, straps and chains. Plastic, wood or similar protective sleeves on the contact points help, and forklift tines should be covered too.

    If the pipe has been in contact with carbon steel, clean the surface before it is welded or fitted.

    How do I stop carbon steel pipe rusting in storage?icon-minus-redicon-plus-red

    Moisture is the cause, so aim to keep the pipe dry. Rust develops faster as humidity rises, and condensation, rain and damp floors are the usual sources. Store pipe off the ground, ideally indoors in a dry, ventilated space.

    If pipe has to be stored outside, cover it with something that sheds water but still lets air move, because a sealed sheet can trap condensation underneath. Warm, damp air meeting cold steel is a common cause of condensation, so avoid sudden changes where you can.

    Check the pipe now and then. A light surface film can usually be removed, but pitting means the pipe should be assessed before use.

    Do I need end caps on stored pipe?icon-minus-redicon-plus-red

    They are often worthwhile. Caps keep dust, moisture, swarf and small pests out of the bore, and they protect bevelled or threaded ends from knocks that would need re-machining before welding or fitting. This matters most for stainless steel, high-purity work and pipe with a coated or clean interior.

    Use caps that fit properly and do not trap moisture against the steel. Check they are all still in place when you take pipe from the rack, and replace any that are lost.

    If the inside of a pipe matters for the job, look inside before you use it and clean it if needed, even when caps were fitted.

    Shop Similar Categories