WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
    Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

    Rapid Ref : 4021-SET1  

    HMT Tungsten Carbide TCT Burr 4 Piece 12mm Set
    4021-SET1

    Click here to see what's included

    £102.51  EX VAT
    SSP Suggested Selling Price = £120.60  YOU SAVE £18.09
     Buy in 3 easy interest free payments of £34.17† with
    HMT TCT Burrs are made to the highest specifications, giving metalworkers a precision cut, high control, and long life. These burrs are recommended for use with high-speed die grinders or straight grinders. All burrs are 100% braze tested for strength and safety.

    HMT TCT Burrs FAQs

    Straight answers on choosing, fitting and using tungsten carbide rotary burrs for deburring, shaping and weld dressing.

    What are tungsten carbide (TCT) burrs used for?icon-minus-redicon-plus-red

    TCT burrs are rotary files that run in a die grinder or similar high-speed tool. They remove material from metal quickly and are used for deburring cut edges, chamfering, shaping, blending and cleaning up welds, as well as enlarging or finishing holes and working into awkward corners.

    Carbide stays hard at working temperatures, so a burr usually outlasts an ordinary steel file or a grinding stone on the same job. Always match the burr to the material and the shape of the job, and follow the burr and grinder makers' instructions.

    How do I choose the right burr shape?icon-minus-redicon-plus-red

    Pick the shape that fits the surface you are working on. A cylinder, with a flat or rounded end, suits flat surfaces, edge deburring and weld removal. A ball suits concave cuts, hollowing and rounding edges. A tree (pointed or rounded) is used for V-grooves, fillets and curves, and a flame reaches tight areas while still working larger surfaces. A cone is handy for chamfering and deburring in narrow spaces.

    If you are unsure, a mixed set of common shapes is a sensible starting point. Shape letter codes differ between makers, so check the description rather than relying on the code alone.

    What is the difference between single cut, double cut and aluminium cut burrs?icon-minus-redicon-plus-red

    A single cut burr has one spiral flute and removes material quickly, usually leaving a rougher finish. A double cut burr has a second set of cross-cut teeth that breaks the chips up, giving better control and a smoother finish. An aluminium cut burr has wide, deep flutes that clear soft metal and resist clogging.

    For aluminium and other soft metals, an aluminium cut burr is the usual choice. For steel and stainless, suppliers differ: many suggest double cut for control and finish, while some prefer single cut for faster removal. Check the burr maker's recommendation for your material.

    What speed should I run a carbide burr at?icon-minus-redicon-plus-red

    Never exceed the maximum speed marked on the burr or the grinder. The burr's rated maximum should be at least as high as the speed of the tool you are using, and a die grinder should be checked against its own marked speed.

    Within that limit, harder metals such as stainless steel usually need a lower speed than soft metals such as aluminium. Burrs with long shanks need extra care and a reduced speed. If you are unsure of the actual speed of an air or electric grinder, check the maker's data and have it verified before fitting the burr.

    Shop Similar Categories